Toward AlGaN Focal Plane Arrays for Solar‐Blind Ultraviolet Detection
نویسندگان
چکیده
منابع مشابه
Mosaicked Multispectral Focal Plane Arrays
A mosaicked sensor is a monolithic array of many sensors, arranged in a geometric pattern. In the commercial digital color camera market, the mosaicked color filter array (CFA) technique is widely used, in which instead of using three charged coupled devices (CCDs) to capture the red, green, and blue spectral bands for each pixel, each pixel is associated with just one device covered by an opti...
متن کاملOptical Detectors for Focal Plane Arrays §
The paper presents progress in optical detector technologies during the past 25 years. Classification of two types of detectors (photon detectors and thermal detectors) is done on the basis of their principle of operation. The overview of optical material systems and detectors is presented. Also recent progress in different technologies is described. Discussion is focused mainly on current and ...
متن کاملLarge Focal Plane Arrays for Future Missions
A 3x3 raft of modular detector assemblies Large Focal Plane Arrays for Future Missions Scowen, Nikzad et al. Abstract We outline the challenges associated with the development and construction of large focal plane arrays for use both on the ground and in space. Using lessons learned from existing JPL-led and ASU/JPL partnership efforts to develop technology for, and design such arrays and image...
متن کاملFull-Sampling Focal Plane Arrays
The eeciency of single dish mapping and synthesis array mosaicing can be increased by completely sampling the information in the antenna's focal plane. This requires a densely packed array of electrically small elements. Each telescope beam is formed with a weighted combination of signals from seven or more elements. This has the added advantage of correcting for large scale reeector distortion...
متن کاملTHz Imaging Using Uncooled Wideband Direct Detection Focal Plane Arrays
In millimeter and submillimeter-wave radiometric imaging systems, a persistent goal is the increase in the speed of acquisition of the image while maintaining a high sensitivity. Typically, the highest sensitivity is achieved by cryogenically cooling the detectors, specifically in astronomical applications. However, for the purpose of low-cost imaging applications, it is desirable to operate at...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: physica status solidi (a)
سال: 2019
ISSN: 1862-6300,1862-6319
DOI: 10.1002/pssa.201900769