Toward a generalized correlation for liquid–vapor two-phase frictional pressure drop across staggered micro-pin-fin arrays
نویسندگان
چکیده
منابع مشابه
Universal approach to predicting two-phase frictional pressure drop for mini/micro-channel saturated flow boiling
This paper is a part of a recent series of studies by the authors to develop universal predictive tools for pressure drop and heat transfer coefficient for mini/micro-channel flows that are capable of tackling fluids with drastically different thermophysical properties and very broad ranges of all geometrical and flow parameters of practical interest. In this study, a new technique is proposed ...
متن کاملResearch on Properties of Fluid Pressure Drop for Electric Vehicle IGBT Pin Fin Heat Sink
The Performance of electric vehicle IGPT Pin fin heat sink can be measured by the temperature field and the fluid pressure and other parameters. In order to improve the cooling effect of Pin fin heat sink, diameter, length and distance of the fin was optimized combination. The relationship between pressure drop of the water inlet, outlet and pin fin parameters was analyzed and calculated. It wa...
متن کاملTwo Phase Frictional Pressure Drop of Carbon Dioxide in Horizontal Micro Tubes
Two-phase frictional pressure drop data were obtained for condensation of carbon dioxide in single horizontal micro tube of inner diameter ranged from 0.6 mm up to 1.6 mm over mass flow rates from 2.5*10 to 17*10 kg/s and vapor qualities from 0.0 to 1.0. The inlet condensing pressure is changed from 33.5 to 45 bars. The saturation temperature ranged from -1.5 C up to 10 C. These data have then ...
متن کاملFlow boiling of water in a circular staggered micro-pin fin heat sink
Flow boiling of water across a bank of circular staggered micro-pin fins, 250 lm long and 100 lm diameter with pitch-to-diameter ratio of 1.5, was experimentally studied for mass fluxes ranging from 346 kg/m s to 794 kg/m s and surface heat fluxes ranging from 20 W/cm to 350 W/cm. Local temperature measurements were used to elucidate the two-phase heat transfer coefficients. The flow was visual...
متن کاملUniversal approach to predicting two-phase frictional pressure drop for adiabatic and condensing mini/micro-channel flows
Previous models and correlations for the prediction of pressure drop in adiabatic and condensing mini/ micro-channel flows have been validated for only a few working fluids and relatively narrow ranges of relevant parameters. A universal predictive approach for these flows must be capable of tackling many fluids with drastically different thermophysical properties and very broad ranges of all g...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Communications in Heat and Mass Transfer
سال: 2016
ISSN: 0735-1933
DOI: 10.1016/j.icheatmasstransfer.2016.04.027