Toward 3D printed hydrogen storage materials made with ABS-MOF composites
نویسندگان
چکیده
منابع مشابه
Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
3D printing is used extensively in product prototyping and continues to emerge as a viable option for the direct manufacture of final parts. It is known that dielectric materials with relatively high real permittivity-which are required in important technology sectors such as electronics and communications-may be 3D printed using a variety of techniques. Among these, the fused deposition of pol...
متن کاملAcoustic properties of 3D printed bio-degradable micro-perforated panels made of Corkwood Fiber-Reinforced composites
Introduction: Micro perforated panel (MPP) absorbents promise the next generation of sound absorbers as they have significant advantages over other porous adsorbents. In this study, we will investigate the acoustic performance of MPP absorbents made of biodegradable polylactic acid composite reinforced with natural corkwood fibers (PLA/Corkwood) by 3D printing technology. Material and Methods:...
متن کامل3D-Printed Autonomous Sensory Composites
DOI: 10.1002/admt.201600257 materials (solids, thin-films, and liquids) and functions into a single seamless autonomous sensory composite by avoiding the use of a premade substrate, and 3D-printing all required materials without any external processing. We present a monolithic integration of strain sensitive elements with an organic electrochemical transistor (OECT)based amplifier and an electr...
متن کاملThe chemical, mechanical, and physical properties of 3D printed materials composed of TiO2-ABS nanocomposites
To expand the chemical capabilities of 3D printed structures generated from commercial thermoplastic printers, we have produced and printed polymer filaments that contain inorganic nanoparticles. TiO2 was dispersed into acrylonitrile butadiene styrene (ABS) and extruded into filaments with 1.75 mm diameters. We produced filaments with TiO2 compositions of 1%, 5%, and 10% (kg/kg) and printed str...
متن کاملResistivity and Its Anisotropy Characterization of 3D-Printed Acrylonitrile Butadiene Styrene Copolymer (ABS)/Carbon Black (CB) Composites
The rapid printing of 3D parts with desired electrical properties enables numerous applications. Fused deposition modeling (FDM) using conductive thermoplastic composites has been a valuable approach for such fabrication. The parts produced by FDM possess various controllable structural features, but the effects of the structural features on the electrical properties remain to be determined. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers for Advanced Technologies
سال: 2017
ISSN: 1042-7147
DOI: 10.1002/pat.4197