Topology and structure analysis of carbon fiber-reinforced polyimide composites
نویسندگان
چکیده
This paper describes the production of carbon fiber / high-performance polyimide prepregs and study prepreg samples quality by scanning electron microscopy, atomic-force microscopy ion-conductance microscopy. The were produced using a laboratory-designed setup impregnation with solution. structure made it possible to establish connection between polymer matrix composition impregnation. Thus, shows that containing aliphatic fragment quaternary atom produces best performance suitable for FDM 3D printing.
منابع مشابه
Carbon Fiber Reinforced Bismaleimide Composites
Bismaleimide (BMI) resins are developed very rapidly due to the demands of the defense and aerospace industries. They are cross-linked polymers which process like epoxy resins but have an upper use temperature of 230°C, compared to the epoxy upper use temperature of 175°C. Also due to the available intrinsic properties of BMI resins such as higher thermal stability and lower toxicity than those...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملVibration Analysis of Glass Fiber Reinforced Composites
Glass fiber reinforced resol/vac-eha composites have been fabricated in laboratory to determine the dynamic behavior of glass fiber reinforced composites. Resol solution was blended with vinyl acetate-2-ethylhexyl acrylate (vac-eha) resin in an aqueous medium with varying volume fraction of glass fibers. The role of fiber/matrix interactions in glass fibers reinforced composites were investigat...
متن کاملFatigue analysis of glass fiber reinforced composites
Some structure materials can match the flexibility and effectiveness of glass fiber Reinforced plastic, commonly called GFRP for short or simply fiberglass. Even it is very high strength, light weight, strong, and completely waterproof, it can be molded into free form shapes such as aerospace structures, and then also it has its endurance limits. Endurance limit means loss of strength and stiff...
متن کاملProcessing of Carbon Fiber Reinforced Composites by Three Dimensional Photolithography
The reinforcement of photoresins with continuous carbon fibers is discussed in this paper. The processing was conducted in an automated desktop photolithography unit (ADPU) developed and built in-house. Continuous fibers were added in situ to the photoresin to obtain composite samples containing over 20 vol% of the fibers. The tensile strength of these composites improved by at least a factor o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2023
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202337601023