Tool Wear in Culling of Forged Sintered Material
نویسندگان
چکیده
منابع مشابه
Sintered hydroxyapatite ceramic for wear studies.
A sintered hydroxyapatite (HAP) ceramic for use in wear studies was prepared from a commercial tricalcium phosphate. The sintered HAP had physical properties close to those of human enamel. The coefficient of friction and wear of the sintered HAP ceramic as characterized by tangential force, track width, and surface failure data, approximated those of human enamel.
متن کاملA Shaft Culling Tool
Shaft culling is a means to accelerate the testing of visibility between two objects. This paper briefly describes an algorithm for shaft culling and various implementation options. The entire code and test harness for the algorithm is available online.
متن کاملSintered material from alkaline basaltic tuffs
he possibility to obtain sintered material from alkaline basaltic tuffs is demonstrated. The parent rock was milled for 10–15 min, the resulting owder was pressed at 100 MPa and the obtained samples were heat-treated in the range of 1000–1140 ◦C. The sintering behaviour and the phase ormation were studied by pycnometry, dilatometry, DTA, XRD and SEM. The final material was obtained by sintering...
متن کاملA Study of the Wear Behavior of a Rail Material
The rail track is one of the most important elements of a railway system. During the passage of trains, the rails are subjected to contact load that comes from the wheels of the train. The railway track often fails in service due to wear caused by contact fatigue and other wear damage mechanisms that could also limit the life span of the railway infrastructure and railway vehicle. The aim of t...
متن کاملCheck Tic-coated Tungsten Carbide Tool Wear in Machining Steel
In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2004
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.51.330