Tool Stresses in Soft and Hard Finish Turning with Low Content CBN Tool by Finite Elements Analysis
نویسندگان
چکیده
منابع مشابه
Investigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
In this research work a series of tests were conducted in order to determine flank wear and cutting force FY on hard AISI 440 C martensitic stainless steel and SCM 440 alloy steels. The operating parameters are cutting speed, feed rate and a constant depth of cut to investigate the flank wear and cutting force. No cutting fluid was used during the turning process. The cutting tool used was CBN ...
متن کاملCBN tool wear in hard turning: a survey on research progresses
Direct machining steel parts at a hardened state, known as hard turning, offers a number of potential benefits over traditional grinding in some applications. In addition, hard turning has several unique process characteristics, e.g., segmented chip formation and microstructural alterations at the machined surfaces, fundamentally different from conventional turning. Hard turning is, therefore, ...
متن کاملTool Life, Wear Rates, and Surface Quality in Hard Turning
An on-going comparative study of wear rates and tool lives under varying cutting parameters is presented in this paper, along with results indicating the abilities and limitations of the hard turning process to produce finished surfaces with acceptable roughness and integrity. To date, the study has consisted of thirteen combinations of machining conditions. The tests were performed with four d...
متن کاملPredictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models
The tool wear is an unavoidable phenomenon when using coated carbide tools during hard turning of hardened steels. This work focuses on the prediction of tool wear using regression analysis and artificial neural network (ANN).The work piece taken into consideration is AISI4140 steel hardened to 47 HRC. The models are developed from the results of experiments, which are carried out based on De...
متن کاملThermal modeling for white layer predictions in finish hard turning
Part thermal damage is a process limitation in finish hard turning and understanding process parameter effects, especially, tool wear, on cutting temperatures is fundamental for process modeling and optimization. This study develops an analytical model for cutting temperature predictions, in particular, at the machined-surfaces, in finish hard turning by either a new or worn tool. A mechanistic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Physica Polonica A
سال: 2018
ISSN: 1898-794X,0587-4246
DOI: 10.12693/aphyspola.134.48