Tool Steels. 50HRC Type Pre-hardened Cold Work Tool Steel, CX1.

Effect of Cryogenic Treatment on Mechanical Properties of Cold Work Tool Steels

In this paper effect of cryogenic treatment on mechanical properties of cold work tool steels at various combination of heat treatment cycle (process sequence) are studied. The material selected for these processes are AISI D2 and D3.Cryogenic treatment is commonly referred as cryotreatment, is an add-on process to the conventional heat treatment of tool steel. Cryogenic treatment improves hard...

Experimental Investigations on Heat Treatment of Cold Work Tool Steels: Part 1, Air-hardening Grade (d2)

The present experimental investigations deal with the improvement of mechanical properties of cold work tool steels through different heat treatment processes. An attempt was made to get optimal combination of hardness and toughness through changes of microstructure by heat treatment. The toughness of D2 tool steel increases with tempering temperature. The hardness of D2 tool steel decreases wi...

The Effect of Deep Cryogenic Treatment on Microstructure, Hardness and Wear Behavior of INDRA 5 Cold Work Tool Steel

helical milling of cold-work aisi d2 steel with pvd carbide tool under dry conditions

0

Tool Damage and Adhesion Effects in Turning and Drilling of Hardened Steels

Noteworthy results have been obtained in the turning and drilling of hardened high-strength steels using tungsten carbide based cutting tools. In a finish turning process, it was seen that surface roughness and tool flank wear followed very different trends against cutting time. The suggested explanation for this behaviour is that the profile cut into the workpiece surface is determined by the ...