TMF–LCF life assessment of a Lost Foam Casting A319 aluminum alloy
نویسندگان
چکیده
منابع مشابه
The Effects of Gating Systems on the Soundness of Lost Foam Casting (LFC) Process of Al-Si Alloy (A.413.0)
The effects of gating systems, number of runner, and their locations, in the Lost Foam Casting (LFC) of Aluminum alloy (A.413.0) were investigated. Six different gating systems, with one or two running systems were designed. X-ray radiography and the three axis-bending tests have been employed to evaluate the casting soundness and quality. The results revealed that gating systems have a major e...
متن کاملDevelopment of a Ceramic Foam Filter for Filtering Molten Aluminum Alloy in Casting Processes
Currently, liquid metal filtration in casting process is a familiar refining technology for casting process. This technique be able to exist removed the inclusions inside the melts and subsequently improves the mechanical properties of the product. Furthermore this will also improved the surface finish and tightness of cast product. This significantly reduced the rework cost. The present resear...
متن کاملBehavior of Generated Gas in Lost Foam Casting
In the Lost Foam Casting process, melting point temperature of metal, as well as volume and rate of the foam degradation have significant effect on the mold filling pattern. Therefore, gas generation capacity and gas gap length are two important parameters for modeling of mold filling time of the lost foam casting processes. In this paper, the gas gap length at the liquidfoam interface for a lo...
متن کاملAn Overview of Lost Foam Casting Technology Development in China
China has had an unprecedented economic boom within the foundry industry in the past two decades. Lost foam casting technology has gained increasing popularity during this time. In China, about two hundred foundries have lost foam casting operations with total annual casting production of approximately 300,000 tons in 2006. This paper reviews the current lost foam casting industry in China with...
متن کاملEffect of strontium and cooling rate upon eutectic temperatures of A319 aluminum alloy
DTA analysis was used to investigate the solidification reactions of alloy A319 with either 12 or 136 ppm of Sr added. Strontium does not affect primary solidification of (Al) dendrites but modifies the kinetics of the (Al)–Si eutectic. The effects of Sr level and of cooling rate on the characteristic temperatures for the (Al)–Si and other eutectic reactions are described.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Fatigue
سال: 2013
ISSN: 0142-1123
DOI: 10.1016/j.ijfatigue.2012.01.012