Titanium metallization coating deposited on AlN ceramics substrate by means friction surfacing process
نویسندگان
چکیده
منابع مشابه
Thin Bioactive Zn Substituted Hydroxyapatite Coating Deposited on Ultrafine-Grained Titanium Substrate: Structure Analysis
Nanocrystalline Zn-substituted hydroxyapatite coatings were deposited by radiofrequency magnetron sputtering on the surface of ultrafine-grained titanium substrates. Cross-section transmission electron microscopy provided information about the morphology and texture of the thin film while in-column energy dispersive X-ray analysis confirmed the presence of Zn in the coating. The Zn-substituted ...
متن کاملSol-Gel Derived Titania Coating on Titanium Substrate
The synthesis of titania via sol-gel method has been widely studied. In the present work, titania was deposited onto a titanium substrat...
متن کاملExperimental Investigation of Tool Steel M2 Coating on Mild Steel by Friction Surfacing
Friction surfacing is an emerging surface engineering technology, developed on the basic principle of friction welding, for depositing wear and corrosion resistant metallic coatings. In the present work coating of tool steel M2 were made on mild steel by friction surfacing by using 2 factorial designs with 3 factors at two levels for each. Process parameters developed a satisfactory deposition ...
متن کاملsol-gel derived titania coating on titanium substrate
the synthesis of titania via sol-gel method has been widely studied. in the present work, titania was deposited onto a titanium substrate via sol-gel method. different processing parameters such as the repetition number of dipping/heat treatment process and dipping time have been studied to obtain the homogenous titania coating. phase and microstructural evaluation of the powder and coating sam...
متن کاملPREPARATION OF CATALYTIC COATING OF TITANIUM OXIDE BY MEANS OF ELECTROLYTIC DEPOSITION
In the current research, the optimum conditions for the electrolytic deposition of TiO2 coatings on titanium pieces were experimentally investigated. Flat pieces of commercially available titanium with dimensions of 50 x20 x3 mm were used as the anode and cathode electrodes. The coatings were applied on the cathode in an electrolyte solution essentially from water and methanol, containing diffe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Welding Technology Review
سال: 2020
ISSN: 2449-7959,0033-2364
DOI: 10.26628/wtr.v92i3.1108