Titanium Casting Procedure Using Thermal Expansion Inhibited Investment. Part 1. Castability and Dimensional Change.
نویسندگان
چکیده
منابع مشابه
Dimensional accuracy and surface property of titanium casting using gypsum-bonded alumina investment.
The aim of the present study was to evaluate the dimensional accuracy and surface property of titanium casting obtained using a gypsum-bonded alumina investment. The experimental gypsum-bonded alumina investment with 20 mass% gypsum content mixed with 2 mass% potassium sulfate was used for five cp titanium castings and three Cu-Zn alloy castings. The accuracy, surface roughness (Ra), and reacti...
متن کاملLow Thermal Diffusivity Investment Casting Molds using Cenospheres
Control of the thermal properties of investment casting molds can be used to improve mold filing and control directional casting solidification. Experiments were performed to design a low thermal diffusivity investment casting mold through the use of hollow spherical refractory particles (cenospheres). The number of stucco layers in which the cenospheres were substituted for silica grain was an...
متن کاملPlatinum Investment Casting , Part II : Alloy
Two widely used jewellery investment casting alloys (platinum with 5 wt% ruthenium (Pt-5Ru) and platinum with 5 wt% cobalt (Pt-5Co)) suffer from poor castability and other drawbacks. In this work thermodynamic calculations of alloy properties were employed to optimise the alloy compositions. Segregation behaviour appeared to be important for the melting range. Scheil simulations were used to si...
متن کاملOptimization of Dimensional Deviations in Wax Patterns for Investment Casting
Investment casting is a versatile manufacturing process to produce high quality parts with high dimensional accuracy. The process begins with the manufacture of wax patterns. The dimensional accuracy of the model affects the quality of the finished part. The present study investigated the control and optimization of dimensional deviations in wax patterns. A mold for an H-shaped wax pattern was ...
متن کاملCastability and surface hardness of titanium cast plates obtained from experimental phosphate-bonded silica investment molds.
The effect of 12 different experimental compositions of phosphate-bonded SiO2 investments was examined on cast pure titanium. The mold temperature was 600 degrees C and the casting was conducted with an argon-arc melting and pressure casting machine. Castability was evaluated by the volume of casting porosity, which was calculated from the volume of wax pattern (15 mm x 15 mm x 1.5 mm), the wei...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nihon Hotetsu Shika Gakkai Zasshi
سال: 1993
ISSN: 1883-177X,0389-5386
DOI: 10.2186/jjps.37.1319