TiN Coatings on Titanium Substrates Using Plasma Assisted Ion Implantation
نویسندگان
چکیده
منابع مشابه
Blood Compatibility of Titanium-Based Coatings Prepared by Metal Plasma Immersion Ion Implantation and Deposition
In this work the suitability of some Tibased coatings as coating for blood-contacting implants is analyzed. Layers of pure Ti, Ti nitride, Ti oxynitrides (TiN1-xOx with x = 0.25, 0.50, and 0.75) and Ti oxides were deposited from a plasma produced by cathodic arc evaporation under addition of N2 and/or O2. The oxynitrides are crystalline with the fcc structure of TiN up to x = 0.25. For x = 0.5 ...
متن کاملA Review on Titanium Nitride and Titanium Carbide Single and Multilayer Coatings Deposited by Plasma Assisted Chemical Vapor Deposition
In this paper, we reviewed researches about the titanium nitride (TiN) and titanium carbide (TiC) single and multilayer coatings. These coatings were deposited by the plasma assisted chemical vapor deposition (PACVD) technique. Plasma-based technologies are used for the processing of thin films and coatings for different applications such as automobile and aerospace parts, computer disc drives,...
متن کاملFacile Synthesis of Photofunctional Nanolayer Coatings on Titanium Substrates
We developed a two-step chemical bonding process using photosensitizer molecules to fabricate photofunctional nanolayer coatings on hematoporphyrin- (HP-) coated Ti substrates. In the first step, 3-aminopropyltriethoxysilane was covalently functionalized onto the surface of the Ti substrates to provide heterogeneous sites for immobilizing the HP molecules. Then, HP molecules with carboxyl group...
متن کاملElectrochemical preparation of chitosan/hydroxyapatite composite coatings on titanium substrates.
Composite coatings containing brushite (CaHPO(4). 2H(2)O) and chitosan were prepared by electrochemical deposition. The brushite/chitosan composites were converted to hydroxyapatite/chitosan composites in aqueous solutions of sodium hydroxide. The coatings ranged from approximately 1 to 15% chitosan by weight. Qualitative assessment of the coatings showed adhesion significantly improved over th...
متن کاملDeposition of Nano-Crystalline Fluor-hydroxyapatite Coatings on Titanium Substrates via Sol-Gel Method
In this investigation, fluor-hydroxyapatite (FHA) film was deposited on a titanium substrate by sol-gel method. Triethyl phosphite, ammonium fluoride and calcium nitrate in ethanol solutions were used respectively as P, F and Ca precursors. Typical apatite structures were obtained for all coatings after dipping and subsequent heat treatment at 550, 700 and 800 ºC, the coating layers were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2015
ISSN: 1742-6596
DOI: 10.1088/1742-6596/591/1/012043