TIME-STEPPING FINITE-ELEMENT ANALYSIS OF DYNAMIC ECCENTRICITY FAULT IN A THREE-PHASE SALIENT POLE SYNCHRONOUS GENERATOR

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Time-stepping Finite-element Analysis of Dy- Namic Eccentricity Fault in a Three-phase Salient Pole Synchronous Generator

In this paper, two-dimensional time-stepping finiteelement (TSFE) method is performed for modeling and analyzing of a salient pole synchronous generator with different degree of dynamic eccentricity (DE) fault. TSFE analysis is used to describe the influence of DE fault on the flux distribution within the generator and no-load voltage profiles at low and high field current is obtained for healt...

متن کامل

Mixed Eccentricity Fault Diagnosis in Salient-pole Synchronous Generator Using Modified Winding Function Method

In this paper, winding function method (WFM), applied to a faulted synchronous generator, is modified and is used for online diagnosis of mixed eccentricity fault. For the first time, the static and mixed eccentricities are modeled in synchronous generators. A modified winding function (MWF) method introduced here is more precise compared with previous methods. This MWF enables to compute the a...

متن کامل

comparison of conventional salient-pole synchronous generators and permanent-magnet-assisted salient-pole synchronous generators based on finite element analysis

this paper presents a novel salient pole synchronous generator i.e. permanentmagnet-assisted salient-pole synchronous generator (pma-sgs). due to saturationof conventional synchronous generators (sgs), permanent-magnet-assisted salientpolesynchronous generators (pma-sgs) are presented. pma-sgs are a new type ofsalient-pole synchronous machines with extra permanent magnets (pms) betweenthe adjac...

متن کامل

Analysis of Magnetic Flux Linkage Distribution in Salient-Pole Synchronous Generator with Different Kinds of Inter-Turn Winding Faults

A reliable and accurate diagnosis of inter-turn short circuit faults is a challenging problem in the area of fault diagnosis of electrical machines. The purpose of this challenge is to be more efficient in fault detection and to provide a reliable method with low-cost sensors and simple numerical algorithms which not only detect the occurrence of the fault, but also locate its position in the w...

متن کامل

Time Stepping Finite Element Analysis of Broken Bars Fault in a Three-phase Squirrel-cage Induction Motor

Broken rotor bars and end-ring are common faults in three-phase squirrel-cage induction motors. These faults reduce the developed toque and increase the speed fluctuations of the motor. Meanwhile, developed unsymmetrical magnetic generates noise and vibration in the motor. Local heat around the broken bars may gradually break the adjacent bars and the motor will be finally out of service. Finit...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Progress In Electromagnetics Research B

سال: 2010

ISSN: 1937-6472

DOI: 10.2528/pierb10021003