Timber moment connections using glued-in basalt FRP rods
نویسندگان
چکیده
منابع مشابه
Evaluation of a Timber Bridge for the Secondary Road System Using FRP Reinforced Glued-Laminated Girders
One of the goals that the Innovative Bridge Research and Construction (IRBC) program, sponsored by the Federal Highway Administration (FHWA), wishes to achieve through sponsored research projects is the concept of an economical, durable, short-span bridge that reduces construction time. Delaware County, Iowa took a step in that direction through the construction of a 64 ft. long bridge comprise...
متن کاملBasalt Frp Composite as Reinforcements in Infrastructure
Basalt continuous fibers are regarded as an inert and naturally occurring material that is produced from basalt rock by using single component raw material and drawing and winding fibers from the melt. Basalt based materials are environmentally friendly and nonhazardous. Basalt FRP (BFRP) composites as a reinforcement not only display a higher strength and modulus, but also a similar cost, and ...
متن کاملDurability of FRP rods for concrete structures
Over the last two decades fiber-reinforced polymer (FRP) rods have emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. The application of FRP rods in new or damaged structures requires the development of design equations that must take into account the mechanical properties and the durability properties of FRP pr...
متن کاملFeasibility of glued laminated timber beams 1 with tropical hardwoods
11 A feasibility study of glulam was carried out in French Guiana using local wood species. The aim 12 was to determine gluing parameters affording satisfactory behaviour to manufactured glulam in 13 a tropical climate. 14 Three abundant wood species, with special properties, were selected for the study and 15 Resorcinol-Phenol-Formaldehyde resin was used for bonding. Three industrial parameter...
متن کاملAir-coupled ultrasound inspection of glued laminated timber
A novel air-coupled ultrasound (ACU) 120 kHz normal transmission system enabled successful imaging of bonding and saw cut defects in multilayered glulam beams up to 280 mm in height with a signal-to-noise ratio (SNR) of 40 dB. The main wave propagation paths were modeled; quasi-longitudinal and quasi-transverse modes were coupled in each lamella and the sound field was found to be shifted from ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction and Building Materials
سال: 2017
ISSN: 0950-0618
DOI: 10.1016/j.conbuildmat.2017.03.241