TiC Coating on Carbon Fiber and the Compatibility of TiC Coated Carbon Fiber with Aluminum
نویسندگان
چکیده
منابع مشابه
Effect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملPREDICTING THE STIFFNESS OF BIAXIAL BRAIDED FIBER COMPOSITES BY INCORPORATION OF CARBON NANO FIBER
In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...
متن کاملActivated Carbon Fiber - the Hybrid of Carbon Fiber and Activated Carbon
From application perspectives in adsorption, activated carbon fiber (ACF) is by far one of the most important carbon nanoporous materials to be considered. It has great advantages over other commercial porous storage materials. Activated carbon fiber (ACF) is a promising microporous material with a fiber shape and well-defined porous structure. In general, production of ACF can be commercially ...
متن کاملInfluence of Temperature and Moisture on the Compressive Strength of Carbon Fiber Reinforced Polymers
The effect of moisture absorption and high temperature on the compressive strength of unidirectional IM7/977-2 carbon/epoxy resins have been investigated experimentally. The specimens were divided into 4 groups, and tested under 4 different conditions by varying the testing temperature and moisture parameters. The fiber orientation selected were 0o, ±45o and 90o...
متن کاملFiber–fiber interactions in carbon mat thermoplastics
Carbon mat thermoplastics (CMT) consisting of 12.7 mm long, chopped carbon fibers in a polypropylene matrix were manufactured using the wetlay technique at fiber volume fractions (FVF) from 10% to 25%, and tests simulating the compression molding process were conducted. The packing stress of the CMT followed a power law relation with FVF. A single fiber pull-out fixture was used to measure the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1979
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.43.7_589