Ti3SiC2 MAX Phase From TiC-Si-Ti Mixture

High-power impulse magnetron sputtering of Ti-Si-C thin films from a Ti3SiC2 compound target

We have deposited Ti-Si-C thin films using high-power impulse magnetron sputtering (HIPIMS) from a Ti3SiC2 compound target. The as-deposited films were composite materials with TiC as the main crystalline constituent. X-ray diffraction and photoelectron spectroscopy indicated that they also contained amorphous SiC, and for films deposited on inclined substrates, crystalline Ti5Si3Cx. The film m...

Synthesis and Sintering of Ti3SiC2–SiC Composites through Reactive Hot-Pressing of TiC and Si Precursors

MAX phases are an attractive class of layered solids that have recently attracted a great deal of attention due to their unusual and unique composition. The ternary compound Ti3SiC2 is an example of a material that combines the properties of ceramics and metals. As a ceramic, they are high stiff. Some of them are resistant to oxidation, creep, fatigue, corrosion. They are extremely refractory a...

Multifunctional nanostructured Ti-Si-C thin films

In this Thesis, I have investigated multifunctional nanostructured Ti-Si-C thin films synthesized by magnetron sputtering in the substrate-temperature range from room temperature to 900 °C. The studies cover high-temperature growth of Ti3SiC2 and Ti4SiC3, low-temperature growth of Ti-Si-C nanocomposites, and Ti-Si-C-based multilayers, as well as their electrical, mechanical, and thermal-stabili...

Pore Formation Process of Porous Ti3SiC2 Fabricated by Reactive Sintering

Porous Ti3SiC2 was fabricated with high purity, 99.4 vol %, through reactive sintering of titanium hydride (TiH2), silicon (Si) and graphite (C) elemental powders. The reaction procedures and the pore structure evolution during the sintering process were systematically studied by X-ray diffraction (XRD) and scanning electron microscope (SEM). Our results show that the formation of Ti3SiC2 from ...

Ti3SiC2-formation during Ti–C–Si multilayer deposition by magnetron sputtering at 650 °C