Ti Fiber-Reinforced and Ti Sheet-Enveloped Cast Mg Composite.
نویسندگان
چکیده
منابع مشابه
Comparison among Mechanical Properties of Investment-Cast c.p. Ti, Ti-6Al-7Nb and Ti-15Mo-1Bi Alloys
The present study compares castability and mechanical performance among alloys of c.p. Ti, Ti-6Al-7Nb and a newly-developed Ti-15Mo-1Bi in regard to their as-cast state. Experimental results indicate that average cast length of Ti-6Al-7Nb appears a little lower than c.p. Ti and Ti-15Mo-1Bi, although the differences are not significant. C.p. Ti has an hcp phase of lath-type morphology with serra...
متن کاملMechanical properties and microstructures of dental cast Ti-Ag and Ti-Cu alloys.
In this study, experimental Ti-Ag alloys (5, 10, and 20 mass% Ag) and Ti-Cu alloys (2, 5, and 10 mass% Cu) were made in an argon-arc melting furnace. The alloys were cast into magnesia molds using an argon gas-pressure dental casting machine, and the mechanical properties and microstructures of the castings were investigated. As the concentration of silver or copper in the alloys increased, the...
متن کاملHot Formability of Particle reinforced Ti - Alloys
Titanium alloys exhibit mechanical and physical properties that fit structural applications demanding light-weight, corrosion resistance and biocompatibility. Ceramic reinforcements can further improve some of these mechanical properties, such as wear resistance, specific stiffness and specific strength. In comparison to continuous reinforced titanium alloys, the particle reinforced alloys (PRT...
متن کاملANISOTROPIC SUPERELASTICITY OF TEXTURED Ti-Ni SHEET
A recently developed crystal-mechanics-based constitutive model for polycrystalline shape-memory alloys (Thamburaja and Anand [1]) is shown to quantitatively predict the in-plane anisotropy of superelastic sheet Ti-Ni to reasonable accord. Keywords— Phase transformations, Constitutive equations, Finite-elements, Mechanical testing.
متن کاملInvestigation of LiF, Mg and Ti (TLD-100) Reproducibility
LiF, Mg and Ti cubical TLD chips (known as TLD-100) are widely used for dosimetry purposes. The repeatability of TL dosimetry is investigated by exposing them to doses of (81, 162 and 40.5 mGy) with 662keV photons of Cs-137. A group of 40 cubical TLD chips was randomly selected from a batch and the values of Element Correction Coefficient (ECC) were obtained 4 times by irradiating them to doses...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1992
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.39.464