Threshold Stress in Al-Mg-Mn Alloys during High Temperature Deformation
نویسندگان
چکیده
منابع مشابه
High Temperature Deformation of Twin-Roll Cast Al-Mn-Based Alloys after Equal Channel Angular Pressing
Twin roll cast Al-Mn- and Al-Mn-Zr-based alloys were subjected to four passes of equal channel angular pressing. The resulting grain size of 400 nm contributes to a significant strengthening at room temperature. This microstructure is not fully stable at elevated temperatures and recrystallization and vast grain growth occur at temperatures between 350 and 450 °C. The onset of these microstruct...
متن کاملHigh-temperature dislocation-precipitate interactions in Al alloys: An in situ transmission electron microscopy deformation study
The fundamental processes controlling the high-temperature interaction of dislocations with precipitates in Al-alloys were investigated in real time by deforming specimens in situ in the transmission electron microscope at elevated temperature. The observations support a bypass mechanism involving the interaction of lattice dislocations with the precipitate–matrix interface dislocations, where ...
متن کاملEXPERIMENTALl ANALYSIS OF PARTITION COEFFICIENT IN Al-Mg ALLOYS
Because the partition coefficient is one of the most important parameters affecting microsegregation, the aim of this research is to experimentally analyse the partition coefficient in Al-Mg alloys. In order to experimentally measure the partition coefficient, a series of quenching experiments during solidification were carried out. For this purpose binary Al-Mg alloys containing 6.7 and 10.2 w...
متن کاملMicrostructure and Precipitation in Al - Li - Cu - Mg - ( Mn , Zr ) alloys
Hot rolled Al-6Li-1Cu-1Mg-0.2Mn (at.%) (Al-1.6Li-2.2Cu-0.9Mg-0.4Mn, wt.%) and Al-6Li-1Cu-1Mg-0.03Zr (at.%) (Al-1.6Li-2.3Cu-1Mg-0.1Zr, wt.%) alloys developed for age forming were studied by tensile testing, electron backscatter diffraction (EBSD), three-dimensional atom probe (3DAP), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). For both alloys, DSC analysis...
متن کاملACOUSTIC EMISSION DURING DEFORMATION OF Al-Li ALLOYS
The relationship between tensile elongation and acoustic emission (AE) detected during compressive deformation of 81-Li and Al-Li-Zr alloys has been investigated for a range of microstructure. For comparison, AE measurements have been carried out for A1-Cu and commercial 7050 alloys. In the polycrystalline binary A1-Li alloys, the most pronounced AE was detected in the underaged condition durin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1988
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.52.7_646