Three-dimensional modelling of gas-air mixture combustion process
نویسندگان
چکیده
منابع مشابه
Three-Dimensional Modeling of Combustion Process, Soot and NOx formation In a Direct-injection Diesel Engine
This paper is presented to study the combustion process and emissions in a direct injection diesel engine. Computations are carried out using a three-dimensional model for flows, sprays, combustion and emissions in Diesel engines. Interactions between combustion and emissions with flow field are considered and it is shown that soot mass fraction increases at regions with low turbulence inten...
متن کاملThree Dimensional Modeling of Combustion Process and Emissions Formationin Pre and Main Chambers of an Idirect Injection Diesel Enginge
The combustion processes and emission formation in pre and main chambers of a Lister 8.1 IDI diesel are simulated with the Computational Fluid Dynamics (CFD) code. The model includes spray atomization, mixture formation and distribution and subsequently the combustion processes and emissions formation modeling are carried out with considering of flow configurations in two chambers. A part load ...
متن کاملThree Dimensional Modeling of Mixture Formation and Combustion in a Direct Injection Heavy-Duty Diesel Engine
Due to the stringent legislation for emission of diesel engines and also increasing demand on fuel consumption, the importance of detailed 3D simulation of fuel injection, mixing and combustion have been increased in the recent years. In the present work, FIRE code has been used to study the detailed modeling of spray and mixture formation in a Caterpillar heavy-duty diesel engine. The paper pr...
متن کاملAir-fuel Mixture Preparation for Internal Combustion Engines:Optical Techniques for Diagnosis of the Spray Developments
Nobody escapes the importance of the air/fuel mixture preparation in internal combustion engines, whatever is the thermodynamic cycle they work on and the adopted fuel. The short time between the fueling and the start of the combustion is crucial for the best mixture formation and its burning for energy optimization and the pollutant production. The always stringent vehicle emissions rules led ...
متن کاملSulfur Recovery from Acid Gas Using the Claus Process and High Temperature Air Combustion (HiTAC) Technology
Sulfur-bearing compounds are very detrimental to the environment and to industrial process equipment. They are often obtained or formed as a by-product of separation and thermal processing of fuels containing sulfur, such as coal, crude oil and natural gas. The two sulfur compounds, which need special attention, are: hydrogen sulfide (H2S) and sulfur dioxide (SO2). H2S is a highly corrosive gas...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of King Saud University - Science
سال: 2019
ISSN: 1018-3647
DOI: 10.1016/j.jksus.2018.10.012