Three-Dimensional Finite Element Analysis of Different Connector Designs for All-Ceramic Implant-Supported Fixed Dental Prostheses
نویسندگان
چکیده
All-ceramic fixed dental prostheses (FDPs) tend to fracture at the connector regions due high stress concentration these areas influenced by their design. This study was performed as an adjunct existing clinical evaluate influence of different radii curvature gingival embrasure on distribution a three-unit all-ceramic implanted supported FDP. Three three-dimensional (3D) models were created scanning two titanium implants, suitable zirconia abutments, and patient-retrieved prosthesis using micro-CT scanner. The radius for distal FDP altered measure 0.25 mm, 0.50 0.75 mm. A finite element analysis (FEA) software (ABAQUS) used impact designs stresses. Maximum Principal Stress data collected from individual components (veneer, framework, abutments). had significant assessed components. tensile peak stresses all structures highest in mm model, while presented similar values more uniform distribution.
منابع مشابه
Three-Dimensional Finite Element Analysis of Anterior Single Implant-Supported Prostheses with Different Bone Anchorages
The aim of this study was to evaluate the stress distribution of monocortical and bicortical implant placement of external hexagon connection in the anterior region of the maxilla by 3D finite element analysis (FEA). 3D models were simulated to represent a bone block of anterior region of the maxilla containing an implant (4.0 × 10.0 mm) and an implant-supported cemented metalloceramic crown of...
متن کاملStress analysis of all-ceramic three-unit dental bridges using finite element method
Stress analysis of all-ceramic three-unit dental bridges using finite element method M.F. Biria *- Dr. F. Farahmand** - Dr. Gh. Eslami Amirabadi*** *- M.S in Biomechanics Engineering Faculty of Mechanics. Sharif Industrial University. ** - Associate professor of Mecanical Engineering Dept. Sharif Industrial University. *** - Assistant professor of Orthodontics Dept. Faculty of Dentistry Shahed...
متن کاملThree-Dimensional Finite Element Analysis of Anterior Two-Unit Cantilever Resin-Bonded Fixed Dental Prostheses
The aim of this study was to evaluate the influence of different framework materials on biomechanical behaviour of anterior two-unit cantilever resin-bonded fixed dental prostheses (RBFDPs). A three-dimensional finite element model of a two-unit cantilever RBFDP replacing a maxillary lateral incisor was created. Five framework materials were evaluated: direct fibre-reinforced composite (FRC-Z25...
متن کاملInfluence of three different implant thread designs on stress distribution: A three-dimensional finite element analysis
PURPOSE Clinical success of implant prosthodontics is dependent in part upon the type of implant thread design. The selection of implant thread design plays an important role in the outcome of the treatment. This study was undertaken to evaluate the pattern of stress distribution using a finite element analysis; hence, the area which would be bearing maximum load for a given design would be arr...
متن کاملComparative study of 12 thread shapes of dental implant designs: a three-dimensional finite element analysis
The purpose of this study was to determine the optimal thread shape for an experimental cylinder implant. Twelve three-dimensional finite element models with an implant of different thread shape were created: 1mm, 2mm, and 3mm square designs (S-1, S-2, and S-3); 90, 60, and 30 V-shaped designs (V-1, V-2, and V-3); 45, 30, and 15 buttress designs (B-1, B-2, and B-3); 45, 30, and 15 reverse buttr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ceramics
سال: 2022
ISSN: ['2571-6131']
DOI: https://doi.org/10.3390/ceramics5010004