THREE DIMENSIONAL ATOM PROBE STUDY OF NI-BASE ALLOY/LOW ALLOY STEEL DISSIMILAR METAL WELD INTERFACES
نویسندگان
چکیده
منابع مشابه
Subnanometer three-dimensional atom-probe investigation of segregation at MgO/Cu ceramic/metal heterophase interfaces.
Three-dimensional atom-probe (3DAP) microscopy has been applied to the study of segregation at ceramic/metal (C/M) interfaces. In this article, results on the MgO/Cu(X) (where X = Ag or Sb) systems are summarized. Nanometer-size MgO precipitates with atomically clean and atomically sharp interfaces were prepared in these systems by internal oxidation. Segregation of the ternary component (Ag or...
متن کاملTHREE DIMENSIONAL ATOM PROBE ANALYSIS OF PRE-PRECIPITATE CLUSTERING IN AN Al-Cu-Mg-Ag ALLOY
Trace element additions in age hardening aluminum alloys often modify precipitation products and kinetics. In the case of Al-Cu alloy, combined addition of trace amount of Mg and Ag leads to precipitation of fine and uniform dispersions of plate-like Ω phase on the {111}Al planes in addition to the θ′ precipitates on the {001}Al planes [1,2]. The Ω phase shows high thermal stability and resista...
متن کاملThree-Dimensional Atom-Probe Tomographic Studies of Nickel Monosilicide/Silicon Interfaces on a Subnanometer Scale
Three-dimensional atom-probe tomography was utilized to study the distribution of M (M = Pt or Pd) after silicidation of a solidsolution Ni0.95M0.05 thin-film on Si(100). Both Pt and Pd segregate at the (Ni1-xMx)Si/Si(100) heterophase interface and may be responsible for the increased resistance of (Ni1-xMx)Si to agglomeration at elevated temperatures. Direct evidence of Pt short-circuit diffus...
متن کاملLattice Misfit between Inclusion and Acicular Ferrite in Weld Metal of Low Carbon Low Alloy Steel
To clarify the mechanism of acicular ferrite formation in low carbon submerged arc weld metals of a Ti-B system with different aluminum contents, the lattice misfit between inclusion and acicular ferrite was investigated. The inclusions were directly sliced into thin foils by a focused ion beam device and crystallographic analyses were performed using a transmission electron microscope. These i...
متن کاملUltrasonic Examination of a Weld Repair in Ni-based Alloy
The anisotropic, heterogeneous and coarse granular structures of austenitic stainless steel welds lead to important disturbances of the ultrasonic propagation: beam skewing and splitting, attenuation, backscattering and spurious echoes. These disturbances have been studied by EDF R&D for a few years in order to improve the ultrasonic NDT in nuclear applications. In particular, a methodology for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nuclear Engineering and Technology
سال: 2012
ISSN: 1738-5733
DOI: 10.5516/net.07.2012.018