Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite
نویسندگان
چکیده
منابع مشابه
Two-body and three-body abrasive wear behaviour of polyaryletherketone composites
Single and multipass two-body and three-body abrasive wear behaviour of various polyaryletherketone composites have been carried out by using a pin-on-disc machine and a rubber wheel abrasion test (RWAT) rig. Abrasive wear studies were conducted under different loads and sliding distances. Comparative wear performance of all the composites at different loads shows that specific wear rate (Ko) o...
متن کاملDuctility of Nanostructured Bainite
Nanostructured bainite is a novel ultra-high-strength steel-concept under intensive current research, in which the optimization of its mechanical properties can only come from a clear understanding of the parameters that control its ductility. This work reviews first the nature of this composite-like material as a product of heat treatment conditions. Subsequently, the premises of ductility beh...
متن کاملThree-body wear of different composites resins
Introduction: Low resistance of composite resins to abrasion is a primary concern in the application of these materials for posterior restorations which are prone to high occlusal loads. This study compared the wear resistance of three types of composites. Methods: In this laboratory experiment, five specimens of each of the three types of composites (z250, Heliomolar, Opallis) were prepared...
متن کاملAbrasive Wear in Three-phase Waste-based Polymeric Particle Composites
Original scientific paper The experiment centres on two and three body abrasion in three-phase waste-based composite systems. The composite systems abrasion resistance is defined not only by the physical-mechanical relationships of the separate phases of the composite, but also by the mutual interaction of the phases and on the matrix-filler interface. To describe the composite system abrasion ...
متن کاملFatigue of extremely fine bainite
There is a novel steel invented in which the structure consists of extremely fine platelets of bainitic ferrite dispersed in a matrix of carbon enriched retained austenite. The resulting large density of interfaces makes the alloy very strong in its transformed condition. The authors report the first fatigue tests on this system, by measuring the life of parallel gauged samples tested using cyc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Wear
سال: 2013
ISSN: 0043-1648
DOI: 10.1016/j.wear.2013.09.008