Thin-wall injection molding of polystyrene parts with coated and uncoated cavities
نویسندگان
چکیده
منابع مشابه
Dynamic of Taking out Molding Parts at Injection Molding
E. Ragan, J. Dobránsky, P. Baron, M. Kočiško, J. Svetlík, Technical University in Košice, Slovakia Most plastic parts used in automobile production are manufactured by injection molding. Their quality depends also on taking out molding and on the manipulators for it. Task of this contribution is to theoretically describe a transport of molding at taking out after injection molding in relation o...
متن کاملOutstanding features of powder injection molding for micro parts manufacturing
When powder injection molding first appeared on the market, it was very well received for the potential it offered. However, the market did not grow as expected at that time. In recent years, the perseverance of manufacturers in this field has borne fruit, and today, the market is about 10 billion yen. However, looking at the market, one is still painfully aware of how low its recognition remai...
متن کاملAntec 2016 Color Development for Non Warping Thin Wall Injection Molding
Formulating the wide variety of Colors in demand today for thin section injection molding can be challenging. Customers require dimensionally stable parts that often must match or nest in assembly. Colorant selection is critical to meeting today’s demands and this paper describes a system to achieve these goals.
متن کاملInvestigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method
Low pressure injection molding (LPIM) method in this paper is investigated as a method of forming alumina parts. This is one of the methods of making engineering ceramics with complex shapes and high dimensional accuracy. In this method, a binder system (paraffin wax + carnuba wax) was used as a plastic agent for easy formation of alumina particles. Different parameters such as feedstock temper...
متن کاملStudy on residual stresses of thin-walled injection molding
The residual stresses of the thin-walled injection molding are investigated in this study. It was realized that the behavior of residual stresses in injection molding parts was affected by different process conditions such as melt temperature, mold temperature, packing pressure and filling time. The layer removal method was used to measure the residual stresses at a thin-walled test sample by a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2018
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2017.12.048