Thin Steel Strip Warping after Skin-Pass Rolling with Delivery Angle
نویسندگان
چکیده
منابع مشابه
Using Experimental Procedure to Improve the Efficiency of the Two Stand Reversing Cold Mill
Production of thin steel strips with 0.18-0.26 mm thickness is about 0.75 of annual production of the two stand reversing cold mill, while its efficiency is 60%. This is due to the fact that after montaging the grinded work rolls, rolling thin steel strips (with thicknesses less than 0.18 millimeters) is unavailable. Initially, unsuitable surface roughness, the friction between rolls and the st...
متن کاملUsing Experimental Procedure to Improve the Efficiency of the Two Stand Reversing Cold Mill
Production of thin steel strips with 0.18-0.26 mm thickness is about 0.75 of annual production of the two stand reversing cold mill, while its efficiency is 60%. This is due to the fact that after montaging the grinded work rolls, rolling thin steel strips (with thicknesses less than 0.18 millimeters) is unavailable. Initially, unsuitable surface roughness, the friction between rolls and the st...
متن کاملPhysical Modeling of Steel Delivery during Thin Slab Continuous Casting
A full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (SEN) was constructed. On the basis of the dimensionless Reynolds and Froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. In order to determine the optimum ope...
متن کاملMetallurgically Consistent Determination of Steel Hot Strength Using Process Data from Hot Strip Mill Rolling
It is not rare to observe an inverse relationship between hot strength determined from rolling load of the finishing stands of the hot strip mill and strain. This situation was already described in the literature and is explained by the use of inverse rolling load models that assumes sticking friction in the determination of hot strength. The aim of this work was to show that this “work softeni...
متن کاملOptimum Work Roll Profile Selection in the Hot Rolling of Wide Steel Strip Using Computational Intelligence
The finishing train of a hot strip mill has been modelled by using a constant volume element model. The accuracy of the model has been increased by using an Artificial Neural Network (ANN). A non-linear Rank Based Genetic Algorithm has been developed for the optimization of the work roll profiles in the finishing stands of the simulated hot strip mill. It has been compared with eight other expe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Technology of Plasticity
سال: 2019
ISSN: 0038-1586,1882-0166
DOI: 10.9773/sosei.60.13