Thin film solar cells using impure polycrystalline silicon

Thin-film Silicon Solar Cells

The simplest semiconductor junction that is used in solar cells for separating photogenerated charge carriers is the p-n junction, an interface between the p-type region and ntype region of one semiconductor. Therefore, the basic semiconductor property of a material, the possibility to vary its conductivity by doping, has to be demonstrated first before the material can be considered as a suita...

Optimization of light trapping in polycrystalline silicon thin film solar cells using two-layer nanoparticle structure

Metal nanoparticles have been investigated as an efficient method to enhance the light absorption in thin film solar cell due to the surface plasmonic scattering. In this paper, we studied the light trapping by modifying the common silicon-nanoparticle-dielectric-back reflector structure. We reported the short circuit current (Jsc) enhancement of a two-layer nanoparticle structure, coated with ...

Thin-film crystalline silicon solar cells

A photoelectric conversion efficiency of over 10% has been achieved in thin-film polycrystalline silicon solar cells which consists of a 2 μm thick layer of polycrystalline silicon with a very small grain size (microcrystalline silicon) formed by low-temperature plasma CVD. This has shown that if the recombination velocity at grain boundaries can be made very small, then it is not necessarily i...

Crystalline Silicon Thin Film Solar Cells

Thin film polycrystalline silicon nanowire biosensors.

Polysilicon nanowire biosensors have been fabricated using a top-down process and were used to determine the binding constant of two inflammatory biomarkers. A very low cost nanofabrication process was developed, based on simple and mature photolithography, thin film technology, and plasma etching, enabling an easy route to mass manufacture. Antibody-functionalized nanowire sensors were used to...