Thin film CdZnS/CuInSe2 solar cells by spray pyrolysis
نویسندگان
چکیده
منابع مشابه
Preparation and growth of SnS thin film deposited by spray pyrolysis technique
In this paper thin films of tin sulfide (SnS) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. In this work the characteristic of SnS thin films investigated. The XRD pattern and optical transmittance of thin films also are discussed. With the change in concen...
متن کاملMethods of simulating thin film deposition using spray pyrolysis techniques
Integration of thin tin oxide film formation into CMOS technology is a fundamental step to realize sensitive smart gas sensor devices. Spray pyrolysis is a deposition technique which has the potential to fulfil this requirement. A model for spray pyrolysis deposition is developed and implemented within a Level Set framework. Two models for the topography modification due to spray pyrolysis depo...
متن کاملSpray pyrolysis of La0.6Sr0.4Co0.2Fe0.8O3-δ thin film cathodes
Spray pyrolysis has been used to prepare La0.6 Sr0.4Co0.2Fe0.8O3-δ thin film cathodes for solid oxide fuel cell (SOFC) applications. The films are polycrystalline with nano-meter sized grains and less than 1 μm in thickness. Deposition parameters for film deposition have been established. The ratio of deposition temperature to solvent boiling point is found to be the most important processing p...
متن کاملLow-cost plasmonic solar cells prepared by chemical spray pyrolysis
Solar cells consisting of an extremely thin In2S3/CuInS2 buffer/absorber layer uniformly covering planar ZnO were prepared entirely by chemical spray pyrolysis. Au nanoparticles (Au-NPs) were formed via thermal decomposition of a gold(III) chloride trihydrate (HAuCl4·3H2O) precursor by spraying 2 mmol/L of the aqueous precursor solution onto a substrate held at 260 °C. Current-voltage scans and...
متن کاملpreparation and growth of sns thin film deposited by spray pyrolysis technique
in this paper thin films of tin sulfide (sns) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. in this work the characteristic of sns thin films investigated. the xrd pattern and optical transmittance of thin films also are discussed. with the change in concen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 1986
ISSN: 0250-4707,0973-7669
DOI: 10.1007/bf02744133