Thickness of inhibiting films on glass electrode surfaces
نویسندگان
چکیده
منابع مشابه
Effect of Thickness on Properties of Copper Thin Films Growth on Glass by DC Planar Magnetron Sputtering
Copper thin films with nano-scale structure have numerous applications in modern technology. In this work, Cu thin films with different thicknesses from 50–220 nm have been deposited on glass substrate by DC magnetron sputtering technique at room temperature in pure Ar gas. The sputtering time was considered in 4, 8, 12 and 16 min, respectively. The thickness effect on the structural, mo...
متن کاملSputter-prepared (001) BiFeO3 thin films with ferromagnetic L10-FePt(001) electrode on glass substrates
Highly textured BiFeO3(001) films were formed on L10-FePt(001) bottom electrodes on glass substrates by sputtering at reduced temperature of 400°C. Good electric polarization 2Pr = 80 and 95 μC/cm2, comparable to that of the reported epitaxial films, and coercivity Ec = 415 and 435 kV/cm are achieved in the samples with 20-nm- and 30-nm-thick electrodes. The BiFeO3(001) films show different deg...
متن کاملeffect of thickness on properties of copper thin films growth on glass by dc planar magnetron sputtering
copper thin films with nano-scale structure have numerous applications in modern technology. in this work, cu thin films with different thicknesses from 50–220 nm have been deposited on glass substrate by dc magnetron sputtering technique at room temperature in pure ar gas. the sputtering time was considered in 4, 8, 12 and 16 min, respectively. the thickness effect on the structural, morpholo...
متن کاملEffect of Free Surfaces on the Glass Transition Temperature of Thin Polymer Films.
We report the first measurements of the glass transition temperature Tg for thin freely standing polystyrene (PS) films. We have used Brillouin light scattering to measure Tg for freely standing films of different thicknesses. We find that Tg decreases linearly with film thickness h for h # 700 Å, with a reduction of 70 K for a film with h 290 Å. These measurements characterize unambiguously ...
متن کاملInvestigation the Milling Strategies Effects on Machining of Convex Surfaces made of Glass/Epoxy Composite
In this study the effects of machining parameters such as shearing speed, feed rate, tool diameter and machining depth on different milling strategies i.e. 3D offset, spiral, raster and radial to produce the convex surface made of epoxy/glass composites is investigated. The effects of mentioned strategies on output parameters such as surface roughness and milling removal rate is also studied. T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Research of the National Bureau of Standards
سال: 1948
ISSN: 0091-0635
DOI: 10.6028/jres.041.020