Thick CrN/NbN Multilayer Coating Deposited by Cathodic Arc Technique
نویسندگان
چکیده
منابع مشابه
Macroparticles in films deposited by steered cathodic arc
The macroparticle content of titanium films deposited using a steered vacuum cathodic arc has been investigated. It has been found that the macroparticle number decreases with increasing steering magnetic field strength, and experimental results are found to be consistent with the model in which the number and mass of macroparticles arising from a cathode spot are proportional to the cathode sp...
متن کاملStudy of multilayer and multi-component coatings deposited using cathodic Arc technique on H-13 hot work steel for die-casting applications
Die casting process is used since long, but even today problems like erosion, corrosion, soldering and sticking affect die life. These dies undergo thermal cyclic loads from 70 oC to 600 oC during processing. Physical Vapor Deposition (PVD) hard coating can play an important role in such extreme applications. In the present work, we report the use of Chromium based multila...
متن کاملEvaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method.
In this study, Ti, Al and N doped DLC – referred to here after as “(Ti,Al)CN/DLC composite”- coating and pure diamond-like coating (DLC) were produced by cathodic arc deposition technique and the effects of the coating thickness on their tribological properties were evaluated. The coatings were characterized, using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffrac...
متن کاملCOMPARISON OF THE CrN , TiN AND (Ti, Cr)N PVD COATINGS DEPOSITED BY CATHODIC ARC EVAPORATION
In the present study, CrN, TiN and (Ti, Cr)N coatings were deposited on D6 tool steel substrates. Physical and mechanical properties of coatings such as microstructure, thickness, phase composition, and hardness were evaluated. Phase compositions were studies by X-ray diffraction method. Mechanical properties were determined by nano-indentation technique. The friction and wear behaviour of the ...
متن کاملCharacterization of TiN, CrN and (Ti, Cr) N Coatings Deposited by Cathodic ARC Evaporation
In this investigation PVD Ti-Cr)N coatings were deposited on hardened and tempered tool steel substrates using reactive arc evaporation. Physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and modulus young and coefficient friction were evaluated. Phase compositions were studies by X-ray diffraction method. The surface microstructure and morp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2016
ISSN: 1980-5373,1516-1439
DOI: 10.1590/1980-5373-mr-2016-0293