Thermomechanical Analysis on Ti-Ni Shape Memory Helical Springs Under Cyclic Tensile Loads
نویسندگان
چکیده
منابع مشابه
Superelastic Behavior under Cyclic Loading for Coil Spring of Ti-Ni Shape Memory Alloy
The superelastic behavior of coil springs of a Ti-Ni shape memory alloy was investigated using loading-unloading cycling tests under isothemal temperatures. The effects of the Ni content and shape memory treatment temperatures on the cyclic behavior in the superelastic deformation were investigated. The deformation behavior within the elastic region of the parent phase scarcely changes during t...
متن کاملInternal Friction in Fe-Co-Ni-Ti Shape Memory Alloys
The anomalies of the temperature dependences of the logarithmic decrement and eigen frequency of the free damped vibrations for Fe-Co-Ni-Ti shape memory alloys were first found in the vicinity of the reverse ay martensitic transformation. It was shown the damping capacity in the alloys investigated is comparable with that for TiNi based alloys.
متن کاملFinite element analysis of superelastic, large deformation behavior of shape memory alloy helical springs
Brinson’s one-dimensional constitutive modeling for shape memory alloy (SMA) is extended to consider the asymmetric tensile and compressive behavior as well as the torsional behavior. The incremental finite element method using linear Timoshenko beam elements is formulated by the total Lagrangian approach for the superelastic, large deformation analysis of SMA helical springs. The NiTi helical ...
متن کاملRelationship between Af temperature and load changes in Ni-Ti orthodontic wire under different thermomechanical conditions.
Simple three point bending tests were performed on Ni-Ti wires with three different Af points (1 degree C, 13 degrees C and 34 degrees C) to clarify the relationship between Af temperature and load changes under constant deformation. Each wire was deformed at 37 degrees C and then thermal changes were imposed by temperatures of 2 degrees C or 60 degrees C. The load changes with thermal changes ...
متن کاملShape optimization of reduced beam section under cyclic loads
Optimal shapes are found for reduced beam section of a cantilever H-beam subjected to forced cyclic displacement at the free end. The beam is discretized to finite elements, and a commercial software package called ABAQUS is used for elastoplastic analysis. The numerical results are first compared with experimental results to verify the accuracy. The objective function to be maximized is the di...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2015
ISSN: 1516-1439
DOI: 10.1590/1516-1439.334514