THERMOMECHANICAL ANALYSIS OF ILLITE FROM FÜZÉRRADVÁNY

Thermomechanical Analysis of a

Thermomechanical analysis of the space shuttle tile thermal protection system (TPS) subjected to damage is conducted using the finite element method. The thermal and structural response of the damaged configurations are compared with the undamaged configuration to determine the relative effects of damage on the thermal protection capability and the induced thermal stresses in the TPS. The TPS i...

Modulated-temperature Thermomechanical Analysis

By employing a “modulated-temperature” heating programme composed of a series of heat-isotherm stages, it is possible to separate the change in dimensions of an oriented material during heating into two contributions: a thermally “reversing” component which is due to linear thermal expansion and a “nonreversing” part arising from relaxation to the disordered state on heating above Tg . Some pre...

Integration of thermomechanical strains into tolerancing analysis

The Nature of Illite

INTRODUCTION THE NAME illite was proposed by Grim, Bray and Bradley in 1937 for the mica-type mineral occurring in argillaceous sediments. It was specifically stated that "the term is not proposed as a specific mineral name, but as a general term for the clay mineral constituent of argillaceous sediments belonging to the mica group". Abundant research has shown that many soils, clays and shales...

Montmorillonite/illite Stability Diagrams

Chemical activity diagraoas , prepared to illustrate the properties expected if mixed-layer montmorillonite/illite is regarded as a solid solution, are compared to those derived from a treatment of these materials as a mixture of two phases. If the system is a solid solution, the coexisting aqueous solution should range from higher dissolved silica contents in the presence of kaolinite and a mo...