Thermoelectric performance of films in the bismuth-tellurium and antimony-tellurium systems

Thermoelectric performance of films in the bismuth-tellurium and antimony-tellurium systems

Coevaporated bismuth-tellurium and antimony-tellurium films were fabricated under various deposition conditions scontrolled evaporation rates of individual species, substrate temperature, and substrate materiald, and their thermoelectric sTEd properties sSeebeck coefficient, electrical resistivity, and carrier concentrationd were measured in search of optimal TE performance. The tellurium atomi...

Tellurium as a high-performance elemental thermoelectric

High-efficiency thermoelectric materials require a high conductivity. It is known that a large number of degenerate band valleys offers many conducting channels for improving the conductivity without detrimental effects on the other properties explicitly, and therefore, increases thermoelectric performance. In addition to the strategy of converging different bands, many semiconductors provide a...

Tellurium and tellurium compounds

Discovery of palladium, antimony, tellurium, iodine, and xenon isotopes

Currently, thirty-eight palladium, thirty-eight antimony, thirty-nine tellurium, thirty-eight iodine, and forty xenon isotopes have been observed and the discovery of these isotopes is discussed here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented. ∗Corresponding author. Email address: [email protected]...

High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys.

The dimensionless thermoelectric figure of merit (ZT) in bismuth antimony telluride (BiSbTe) bulk alloys has remained around 1 for more than 50 years. We show that a peak ZT of 1.4 at 100 degrees C can be achieved in a p-type nanocrystalline BiSbTe bulk alloy. These nanocrystalline bulk materials were made by hot pressing nanopowders that were ball-milled from crystalline ingots under inert con...