Thermoelectric Energy Conversion Materials

Thermoelectric energy conversion using nanostructured materials

High performance thermoelectric materials in a wide range of temperatures are essential to broaden the application spectrum of thermoelectric devices. This paper presents experiments on the power and efficiency characteristics of lowand mid-temperature thermoelectric materials. We show that as long as an appreciable temperature difference can be created over a short thermoelectric leg, good pow...

Energy Conversion Using New Thermoelectric Generator

During recent years, microelectronics helped to develop complex and varied technologies. It appears that many of these technologies can be applied successfully to realize Seebeck micro generators: photolithography and deposition methods allow to elaborate thin thermoelectric structures at the micro-scale level. Our goal is to scavenge energy by developing a miniature power source for operating ...

Materials for Clean Energy Conversion

Relationship between thermoelectric figure of merit and energy conversion efficiency.

The formula for maximum efficiency (ηmax) of heat conversion into electricity by a thermoelectric device in terms of the dimensionless figure of merit (ZT) has been widely used to assess the desirability of thermoelectric materials for devices. Unfortunately, the ηmax values vary greatly depending on how the average ZT values are used, raising questions about the applicability of ZT in the case...

Porous Thermoelectric Materials

Thermoelectric materials are sometimes prepared using a sintering process in which the achievement of a high density is often one of the objectives. However, it has recently been shown that the introduction of a highly porous material is desirable in synthetic transverse thermoelements. Porosity may also be an advantage in conventional longitudinal thermoelectric modules in which a high thermal...