Thermodynamics characteristics of MEMS infrared thin film
نویسندگان
چکیده
منابع مشابه
Metal-organic thin-film encapsulation for MEMS
This paper demonstrates a metal-organic thin-film encapsulation technique based on the photolithography of multiple layers of positive-tone photo-definable polymer. This encapsulation process, performed at low temperatures (<110 ◦C) in a standard basic developer, leaves no residue. Piezoelectrically-actuated length-extensional bulk acoustic wave resonators were successfully encapsulated for a p...
متن کاملReSi2 thin-film infrared detectors
Two types of thin-film infrared-sensing devices have been investigated using the narrow band-gap semiconductor, rhenium disilicide ~Eg;0.1 eV!. These are the ReSi2/n-Si heterojunction internal photoemission ~HIP! detector and the ReSi2 thin-film photoconductor. The HIP device was found to be rectifying and to obey a Fowler-type law with a long-wavelength cutoff of ;2.1 mm ~0.59 eV! at room temp...
متن کاملTiNi shape memory alloys for MEMS : thin film deposition , thermophysical properties and laser micromachining characteristics
The growth of TiNi thin films by ion beam sputter deposition using a Kaufmann type ion source is described. Argon ions are used to sputter separate Ti and Ni targets to deposit nearequiatomic TiNi thin films. Typically, ion energies and current densities of 1500 eV and 1 mA cm respectively are used, with an argon overpressure of around 0.05 mtorr, to achieve deposition rates of order 1 μm hr. T...
متن کاملYoung’s modulus of electroplated Ni thin film for MEMS applications
The Young’s modulus of an electroplated nickel (Ni) thin film suitable for microelectromechanical applications has been investigated as a function of process variables: the plating temperature and current density. It was found that the Young’s modulus is approximately 205 GPa at plating temperatures less than 60 jC, close to that of bulk Ni, but drastically drops to approximately 100 GPa at 80 ...
متن کاملCVD diamond thin film technology for MEMS packaging
Due to its extreme hardness, chemical and mechanical stability, large band gap and highest thermal conductivity, poly-crystalline diamond (poly-C) is expected to be an excellent packaging material for biomedical and environmental MEMS devices. A poly-C thin film packaging technology has been developed to explore the application of this novel material on post-MEMS encapsulation packaging process...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2019
ISSN: 1094-4087
DOI: 10.1364/oe.27.032779