THERMODYNAMIC MODELING OF OXIDE MELTS OF CaO - Al2O3 - SiO2 SYSTEMS
نویسندگان
چکیده
منابع مشابه
Measuring and Modeling Viscosity of CaO-Al2O3-SiO2(-K2O) Melt
The effect of K2O on viscosity in CaO-SiO2-Al2O3 melt has been measured by a rotating spindle viscometer. It is indicated from the experimental results that viscosity first increases then decreases with the increasing content of K2O; the maximum viscosity occurs in the field of K2O/ Al2O3 > 1. After gradually adding K2O, the transformation of bridging oxygen (from being bonded with Al ion charg...
متن کاملA thermodynamic assessment of the BaO-MgO, BaO-CaO, BaO-Al2O3 and BaO-SiO2 systems
Aalto University, P.O. Box 11000, FI-00076 Aalto www.aalto.fi Author Rui Zhang, Pekka Taskinen Name of the publication Publisher School of Chemical Technology Unit Department of Materials Science and Engineering Series Aalto University publication series SCIENCE + TECHNOLOGY 4/2014 Field of research Metallurgy
متن کاملThermodynamic simulation on mineralogical composition of CaO–SiO2–Al2O3–MgO quaternary slag system
It is necessary to elucidate the crystallization thermodynamic of mineralogical phases during the cooling process of the molten BFS with different chemical composition, because the high-melting point mineral phase maybe crystallized during the fiber forming and thereafter cooling process. Thermodynamic calculation software FactSage6.4 and the hot remelting experiments were performed to explore ...
متن کاملSynthesis of Nanoscale CaO-Al2O3-SiO2-H2O and Na2O-Al2O3-SiO2-H2O Using the Hydrothermal Method and Their Characterization
C-A-S-H (CaO-Al₂O₃-SiO₂-H₂O) and N-A-S-H (Na₂O-Al₂O₃-SiO₂-H₂O) have a wide range of chemical compositions and structures and are difficult to separate from alkali-activated materials. Therefore, it is difficult to analyze their microscopic properties directly. This paper reports research on the synthesis of C-A-S-H and N-A-S-H particles with an average particle size smaller than 300 nm by apply...
متن کاملdesulfurization of plain carbon steel by cao-al2o3-sio2 and cao-al2o3-sio2-x (x = na2o, sro) synthetic slags
synthetic slag process decreases sulfur and phosphorus contents of steel, improves inclusion removal, protects steel from atmosphere and prevents temperature drop of the liquid steel in the ladle. in this study, the synthetic slags of ternary cao-al2o3-sio2,and quaternary cao-al2o3-sio2-na2o and cao-al2o3-sio2-sro systems were pre-melted and then were kept in contact with the liquid steel in a ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
سال: 2019
ISSN: 2500-3070,0579-2991
DOI: 10.6060/ivkkt.20206301.6054