Thermodynamic Modeling of Ni-C, Co-C, and Ni-Co-C Liquid Alloys Using the Modified Quasichemical Model
نویسندگان
چکیده
منابع مشابه
Ternary Ni-Fe-Co Alloys Nanowire Electrodeposition
Nanowire is a cylindrical nano-structure with nanometer dimensions. In this research, the studied nanowire was made from the magnetic triple Ni-Fe-Co alloy.
 We utilized ordered porous anodic aluminum oxide as a template for the nanowire deposition. The nanowire arrays were electrodeposited in the cylindrical pores of the oxide layer by AC potential in a simple sulfate bath. Then the relatio...
متن کاملTernary Ni-Fe-Co Alloys Nanowire Electrodeposition
Nanowire is a cylindrical nano-structure with nanometer dimensions. In this research, the studied nanowire was made from the magnetic triple Ni-Fe-Co alloy. We utilized ordered porous anodic aluminum oxide as a template for the nanowire deposition. The nanowire arrays were electrodeposited in the cylindrical pores of the oxide layer by AC potential in a simple sulfate bath. Then the relation ...
متن کاملElectroplating and characterization of Zn–Ni, Zn–Co and Zn–Ni–Co alloys
a r t i c l e i n f o Zn–Ni, Zn–Co and Zn–Ni–Co coatings were electrodeposited on mild steel from an acidic chloride bath containing p-aminobenzenesulphonic acid (SA) and gelatin. These additives changed the phase content in the coatings, most likely as a result of their adsorption at the surface of the cathode. The effect of gelatin was more pronounced than that of SA. The Faradaic efficiency ...
متن کاملCALCULATION OF THERMODYNAMIC PROPERTIES OF Al-Fe, Al-Ni AND Ni-Fe ALLOYS USING FACTSAGE
Thermodynamic predicting analysis of three binary systems Al-Fe, Al-Ni and Ni-Fe are shown in this paper. Thermodynamic analysis involved calculation of activities, coefficient of activities, partial and integral values for enthalpies and Gibbs energies of mixing and excess energies at three different temperatures: 1873K, 1900K and 1973K, as well as calculated phase diagrams, for the investigat...
متن کاملتولید پودر سرمت نانوساختار (w,ti)c-ni-co به روش مکانوشیمیایی و سنتز احتراقی
هدف از این پژوهش تولید پودر سرمت نانوساختار (w,ti)c-ni-co به روش مکانوشیمیایی و سنتز احتراقی است. در این راستا از سه گروه مخلوط پودری با نسبت های مختلف جهت تولید این نانوکامپوزیت استفاده شد که در گروه a ازترکیب پودرهای تنگستن،تیتانیم،نیکل، کبالت وکربن با نسبتهای مختلف تنگستن به تیتانیم ، گروه b از ترکیب پودرهای کاربید تنگستن، تیتانیم، نیکل ، کبالت وکربن و گروه c از آلیاژ نیکل- تیتانیم به جای عن...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions B
سال: 2020
ISSN: 1073-5615,1543-1916
DOI: 10.1007/s11663-020-01995-6