Thermodynamic Modeling and Mechanical Properties of Mg-Zn-{Y, Ce} Alloys: Review
نویسندگان
چکیده
Magnesium alloys are a strong candidate for various applications in automobile and aerospace industries due to their low density specific strength. Micro-alloying magnesium with zinc, yttrium, cerium enhances mechanical properties of through grain refinement precipitation hardening. In this work, critical review magnesium-based binary systems including Mg-Zn, Mg-Y, Mg-Ce, Zn-Y, Zn-Ce is presented. Based on the CALPHAD approach first-principles calculations, thermodynamic modeling Mg-Zn-Y Mg-Zn-Ce ternary phase diagrams have been summarized. The influence micro-alloying (yttrium cerium) discussed. A comparison between commercial magnesium–zinc–{yttrium cerium} summarized tables.
منابع مشابه
Biodegradable Mg-Zn-Y alloys with long-period stacking ordered structure: optimization for mechanical properties.
To optimize the mechanical properties for biodegradable orthopedic implant, microstructures and tensile properties of Mg-Zn-Y alloys containing long period stacking ordered (LPSO) phase were investigated. For the as-cast Mg(100-3x)(Zn(1)Y(2))(x) (1 ≤ x ≤ 3) alloys, volume fraction of 18R LPSO phase increases with increasing the contents of Zn and Y. Mg(97)Zn(1)Y(2) alloy exhibits the optimal co...
متن کاملTailoring microstructure of Mg–Zn–Y alloys with quasicrystal and related phases for high mechanical strength
The occurrence of a stable icosahedral (i-) phase, which is quasicrystalline with an icosahedral (fivefold) symmetry, on the equilibrium phase diagram of Mg-Zn-RE (RE = Y, Gd, Tb, Dy, Ho or Er) alloys opened up an interesting possibility of developing a new series of magnesium alloys for structural applications. Alloys based on the i-phase have been studied for the past 14 years. Ultra-high str...
متن کاملModulated Structures, Nanocrystals and Quasicrystals in Mg-Zn-Y Alloys
The formation of the icosahedral phase, BCC (Body centred cubic) phase and nanocrystals are seen in the as-cast alloy with nominal composition of Mg4Zn94Y2. FCC (face centred cubic) phase and modulated structures are formed in the alloys with higher Y content (10% and 25% Y respectively). These phases are analysed keeping in view their relation to the quasicrystals of the Mg-Zn-Y system.
متن کاملAchieving High Strength and Good Ductility in As-Extruded Mg–Gd–Y–Zn Alloys by Ce Micro-Alloying
In this study, the effect of Ce additions on microstructure evolution of Mg-7Gd-3.5Y-0.3Zn (wt %) alloys during the casting, homogenization, aging and extrusion processing are investigated, and novel mechanical properties are also obtained. The results show that Ce addition promotes the formation of long period stacking ordered (LPSO) phases in the as-cast Mg-Gd-Y-Zn-Ce alloys. A high content o...
متن کاملEffect of Hydroxyapatite on the Mechanical Properties and Corrosion Behavior of Mg-Zn-Y Alloy
Mg-Zn-Y alloys with a long period stacking ordered (LPSO) phase are potential candidates for biodegradable implants; however, an unfavorable degradation rate has limited their applications. Hydroxyapatite (HA) has been shown to enhance the corrosion resistance of Mg alloys. In this study, Mg97Zn₁Y₂-0.5 wt% HA composite was synthesized and solution treated at 500 °C for 10 h. The corrosion behav...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Crystals
سال: 2021
ISSN: ['2073-4352']
DOI: https://doi.org/10.3390/cryst11121592