Thermodynamic, Kinetic, and Microstructure Data for Modeling Solidification of Fe-Al-Mn-Si-C Alloys
نویسندگان
چکیده
منابع مشابه
Modelling Microstructure and Properties during Annealing of Cold- rolled Al-Mn-Fe-Si-alloys with different Microchemistries
The physical basis and a mathematical formulation of a softening model nicknamed Alsoft, accounting for the combined effect of recovery and recrystallization during annealing of heavily deformed aluminium alloys have been presented. The prediction power of the model is tested against experiments in terms of softening kinetics and final grain structure of selected Al-MnFe-Si-model alloys with di...
متن کاملThe influence of microchemistry on the recrystallization texture of cold-rolled Al-Mn-Fe-Si alloys
The recrystallization textures of a cold-rolled Al-Mn-Fe-Si model alloy with three different microchemistry states after non-isothermal annealing were studied. The microstructure and texture evolution have been characterized by EBSD. It is clearly demonstrated that the actual microchemistry state as determined by the homogenization procedure strongly influence the recrystallized grain size and ...
متن کاملATOMIC AND MAGNETIC SRO IN Fe-Mn-Si ALLOYS
Neutron diffuse scattering and saturation magnetization experiments have been made on single crystals specimens of Fe3-,MnCSi with c = 0.164 and 0.284 at room temperature. Atomic clustering of Mn atoms on the B sublattice has been revealed. A model of magnetic moment distribution around Mn impurities has been developed and fitted to the experimental magnetic diffuse cross sections. RRsults obta...
متن کاملCALCULATION OF THERMODYNAMIC PROPERTIES OF Al-Fe, Al-Ni AND Ni-Fe ALLOYS USING FACTSAGE
Thermodynamic predicting analysis of three binary systems Al-Fe, Al-Ni and Ni-Fe are shown in this paper. Thermodynamic analysis involved calculation of activities, coefficient of activities, partial and integral values for enthalpies and Gibbs energies of mixing and excess energies at three different temperatures: 1873K, 1900K and 1973K, as well as calculated phase diagrams, for the investigat...
متن کاملThe Mechanical Strength of Si Foams in the Mushy Zone during Solidification of Al–Si Alloys
The mechanical strength of an Al-30% Si alloy in the mushy zone was estimated by using a novel centrifugation apparatus. In the apparatus, the alloy melt was partially solidified, forming a porous structure made of primary Si platelets (Si foam) while cooling. Subsequently, pressure generated by centrifugal force pushed the liquid phase out of the foam. The estimated mechanical strength of the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions B
سال: 2020
ISSN: 1073-5615,1543-1916
DOI: 10.1007/s11663-020-01973-y