Thermo-mechanical stress analysis of dissimilar material joints using FEM
نویسندگان
چکیده
منابع مشابه
Thermo-Mechanical Simulation of Wire Bonding Joints in Power Modules
High voltage and high current power modules are key components for traction applications. In the future, railway locomotives, tramways and elevators will be equipped with Insulated Gate Bipolar Transistor (IGBT) modules. In this field of application high reliability is of decisive importance, especially for aluminum bond wires with diameters up to 500 μm, connecting the silicon device with the ...
متن کاملEvaluation Of Mechanical Properties Of Dissimilar Metal Tube Welded Joints Using Inert Gas Welding
Evaluation of welding process such as metal inert gas welding and tungsten inert gas arc welding on tensile, bend and hardness properties of austenitic stainless steel SS347H(18Cr 10Ni 1Cb ), T22(21⁄4Cr Mo) and T91(9Cr 1Mo V) grades are studied. Tubes of 54 mm of outer diameter and 4 mm of wall thickness is used as a base material in the following combination SS347H VS T91 and T91 VS T22 is wel...
متن کاملThermo Mechanical Analysis of Polypropylene/Calcium Carbonate Nano Composite using Thermo Mechanical Analyzer
Polypropylene is extensively used for varied applications due to its low cost, low density, high thermal stability and resistance to corrosion. Enhanced mechanical properties of Polypropylene can be achieved by mixing it with clays to form nanocomposites which increases its utility. Polypropylene Nano composites are formed by mixing polypropylene with calcium carbonate nano particles. This resu...
متن کاملIdentification of Material Properties by Thermo-mechanical Test Results
This paper deals with the problem of identifying material parameters by measuring mechanical and/or thermal quantities. We propose different energy functions measuring the gap which exists between Analysis and Tests. They allow to compute indicators which will determine if a given set of experimentally obtained data is able to identify the desired thermal and/or mechanical material characterist...
متن کاملStress analysis of hybrid joints of metal and composite plates via 3D-FEM
Three-dimensional finite element models are developed to investigate the effects of both tensile load and uniform temperature load on the stresses in hybrid joints. During the solution of the problem, finite element method (FEM) is preferred, as this method is very suitable for solving many engineering problems. An aluminum sheet is bonded a composite sheet. Hybrid joints are designed from both...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Mechanical and Energy Engineering
سال: 2020
ISSN: 2544-1671,2544-0780
DOI: 10.30464/jmee.2020.4.2.147