Thermo-Mechanical Processing of Iron-Phosphorous-Carbon Alloys
نویسندگان
چکیده
منابع مشابه
Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes
Thermal treatments and thermo-mechanical processing routes were applied on a conventional structural steel (st37 steel: 0.12C-1.11Mn-0.16Si) for improvement of tensile properties and enhancement of work-hardening behavior. Full annealing resulted in a sheet with coarse ferrite grains and pearlite colonies arranged alternatively in distinct bands, which showed high ductility, low strength, and t...
متن کاملThermo-mechanical Processing in a Synchrotron Beam - from Simple Metals to Multiphase Alloys and Intermetallics
The mechanical properties of a metallic product depend strongly on both phase composition and microstructure of a polycrystalline product and large development efforts for the design of novel materials deal with these issues. Besides the physical parameters, the artwork is to perform the right thermo-mechanical processing, which for highly designed materials can be very sophisticated. Therefore...
متن کاملMechanical properties of magnetostrictive iron-gallium alloys
Single crystal specimens of Fe-17 at. % Ga were tested in tension at room temperature. Specimens with a tensile axis orientation of [110] displayed slip lines on the specimen faces corresponding to slip on the {110}with a critical resolved shear stress of 220 MPa. Yielding began at 0.3% elongation and 450 MPa. An ultimate tensile strength of 580 MPa was observed with no fracture occurring throu...
متن کاملnumerical analysis of thermo-mechanical coupling in shape memory alloys
the phase transformation phenomenon due to the crystallographic change of shape memory alloys subjected to mechanical or thermal loading is very complicated. regarding the thermo-mechanical coupling effects in shape memory alloys, in case of high loading rates, heat generation/absorption during the forward/reverse transformation, will lead in temperature-dependent variation and consequently af...
متن کاملPreparation and Properties of Pure Iron Alloys : I . Effects of Carbon and Manganese on the Mechanical Properties of Pure Iron
This paper describes the preparation and mechanical properties of an extensive series of very pure alloys of electrolytic iron, carbon, and manganese whose compositions were so chosen as to bring out the specific effects on pure iron of additions of manganese, additions of carbon, and additions of carbon and manganese together in varying relative proportions. The maximum content each of carbon ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Minerals and Materials Characterization and Engineering
سال: 2011
ISSN: 2327-4077,2327-4085
DOI: 10.4236/jmmce.2011.101006