Thermally stable, low‐resistance PdGe‐based ohmic contacts to high–low doped n‐GaAs
نویسندگان
چکیده
منابع مشابه
Thermally stable, oxidation resistant capping technology for TiÕAl ohmic contacts to n-GaN
The intermetallic TiAl3 has been used as a thermally stable cap for Ti/Al ohmic contacts to n-GaN. The electrical performance of the TiAl3-capped contact is nearly the same as that of a standard Ti/Al/Ni/Au contact processed on the same substrate, but the Ti/Al/TiAl3 contact’s performance is optimized at a much lower temperature. The Ti/Al/TiAl3 contact achieved a lowest specific contact resist...
متن کاملSchottky and ohmic contacts to doped Si1ÿxÿyGexCy layers
We report on titanium contacts to n-type and p-type Si1ÿxÿyGexCy strained heteroepitaxial layers on (100)Si and material and electrical characterization of n-type and p-type platinum±silicide±germanide contacts to Si1ÿxÿyGexCy strained heteroepitaxial layers on (100)Si. Ti contacts to n-type Si1ÿxÿyGexCy show rectifying behavior at low doping levels but become ohmic as layers reach 10 cmÿ3. Ti ...
متن کاملUltra low-resistance palladium silicide Ohmic contacts to lightly doped n- InGaAs
Related Articles Fermi-level depinning at the metal-germanium interface by the formation of epitaxial nickel digermanide NiGe2 using pulsed laser anneal Appl. Phys. Lett. 101, 172103 (2012) Method for investigating threshold field of charge injection at electrode/dielectric interfaces by space charge observation Appl. Phys. Lett. 101, 172902 (2012) Low contact resistivity of metals on nitrogen-...
متن کاملTwo-step deposition of Al-doped ZnO on p-GaN to form ohmic contacts
Al-doped ZnO (AZO) thin films were deposited directly on p-GaN substrates by using a two-step deposition consisting of polymer assisted deposition (PAD) and atomic layer deposition (ALD) methods. Ohmic contacts of the AZO on p-GaN have been formed. The lowest sheet resistance of the two-step prepared AZO films reached to 145 Ω/sq, and the specific contact resistance reduced to 1.47 × 10-2 Ω·cm2...
متن کاملThermally stable Schottky contacts on n-type GaN using ZrB2
The electrical properties and thermal stability of ZrB2 Schottky contacts deposited on n-type GaN have been studied. As-deposited contacts had a barrier height of 0.80 eV, which decreased to 0.7 eV after annealing at 300 °C, and to 0.6 eV after additional annealing at 400 °C in nitrogen for 20 min. However, the barrier height remained at about 0.6 eV even when the diodes were annealed at 600 °C...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 1995
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.114609