Thermally-insulated ultra-fast high temperature sintering (UHS) of zirconia: A master sintering curve analysis

Sintering of zirconia pdf

Ultra High Temperature Microwave Sintering – Furnace and Process Design

Scale up of microwave sintering for high temperature stable non-oxide ceramics, such as SiC, Si3N4, and dispersion ceramics, like SiC-MoSi2 is still difficult, mainly because of lack of an affordable equipment. For air atmosphere sintering different furnaces were developed, like e.g., gas-microwave hybrid heated tunnel kilns [1] or microwave sintering using an adiabatic casket in tunnel kilns [...

Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite

TaC and HfC are thought to have the highest melting point (~4000°C) among all refractory materials. The binary solid solution of TaC and HfC (Ta4HfC5) is also considered as the most refractory material with the melting point over 4000 °C and valuable physical and mechanical properties. The main goal of this work is to fabricate TaC/HfCbased composites which consolidated by means of spark plasma...

Master sintering curve for Gd-doped CeO2 solid electrolytes

The sintering behavior of gadolinia-doped ceria powders was studied by the master sintering curve (MSC). Dilatometric analyses of powders produced by a soft chemical method were performed to provide the experimental data set for the construction of the MSC. The assumed model provided good fittings of the MSC and the activation energy for the sintering of Ce1-xGdxO3-d, with x = 0, 0.05, 0.1, and...

Sintering properties of zirconia-based ceramic composite

This study examines the effects of different ZrB2 content on various mechanical properties and electrical conductivity of ZrB2/Y-TZP composite. Composites with ZrB2 content of up to 20 wt-% were particularly beneficial at the lower sintering temperature range by achieving greater densification and better hardness than Y-TZP monolith. In contrast to the trends estimated from rule of mixture, the...