Thermal Study of Anhydrides Cured Tetrafunctional Cardo Epoxy Resin
نویسندگان
چکیده
منابع مشابه
Curing behavior and thermal properties of trifunctional epoxy resin cured by 4, 4’-diaminodiphenyl sulfone
A novel trifunctional epoxy resin 4-(3, 3-dihydro-7-hydroxy-2, 4, 4-trimethyl-2H-1-benzopyran-2-yl)-1, 3-benzenediol glycidyl (shorted as TMBPBTH-EPOXY) was synthesized in our lab to improve thermal performance. Its curing behavior and performance were studied by using 4, 4′-diaminodiphenyl sulfone (DDS) as hardener with the mass ratio of 100:41 of TMBPBTH-EPOXY and DDS. The curing activation e...
متن کاملEffects of graphene oxides on the cure behaviors of a tetrafunctional epoxy resin
The influence of graphene oxides (GOs) on the cure behavior and thermal stability of a tetrafunctional tetraglycidyl-4,4’-diaminodiphenylmethane cured with 4,4’-diaminodiphenylsulfone was investigated by using dynamic differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The dynamic DSC results showed that the initial reaction temperature and exothermal peak temperature ...
متن کاملTheoretical Study on Decomposition Mechanism of Insulating Epoxy Resin Cured by Anhydride
High temperatures caused by partial discharge results in the decomposition of insulating epoxy resins in electrical equipment. In this paper, the ReaxFF force field is used to investigate the decomposition process of epoxy resins cured by anhydride and the formation mechanisms of small-molecule gases. Results show that the initiation reaction is the cleavage of an ester bond linked with an epox...
متن کاملAnhydrides-Cured Bimodal Rubber-Like Epoxy Asphalt Composites: From Thermosetting to Quasi-Thermosetting
The present engineering practices show the potential that epoxy asphalt composites (EACs) would be a better choice to obtain long life for busy roads. To understand the service performance–related thermorheological properties of prepared bimodal anhydrides-cured rubber-like EACs (REACs), a direct tensile tester, dynamic shear rheometer and mathematical model were used. Tensile tests demonstrate...
متن کاملThermal Analysis Application Brief Determination of Moisture in Epoxy Resin
Reproducible flow properties for the thermoset molded resins are necessary to insure that the manufacturing conditions used, such as mold temperature, mold pressure and cure time, consistently yield a usable final product. Lot-to-lot variations in flow properties can result in material which does not mold properly and must be rejected. One quantity which can substantially influence thermoset fl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Indian Journal of Materials Science
سال: 2013
ISSN: 2314-7490
DOI: 10.1155/2013/892371