Thermal Stress Mitigating Properties for Graded Thermal Barrier Coatings of Gas Turbine.
نویسندگان
چکیده
منابع مشابه
Advanced Thermal Barrier Coatings for Industrial Gas Turbine Engines
Executive Summary 3 Thermal barrier coating (TBC) ceramic topcoats made from Y 2 O 3-stabilized ZrO 2 (YSZ) have been used successfully in gas-turbine engine applications for more than 30 years. YSZ derives its favorable performance from a combination of properties that include low thermal conductivity, high thermal expansion coefficient, and phase stability to relatively high temperatures. Wit...
متن کاملInvestigations of Thermal Barrier Coatings for Turbine Parts
Progress in gas-turbine engine (GTE) manufacturing is continuously linked with a rise of operating temperature and stresses of engine gas path elements, especially the turbine parts. More advanced cooling systems, structural materials and thermal barrier coatings (TBC) and other coatings provide the required life and strength reliability of these components. While engines are in use, the necess...
متن کاملThermophysical properties of thermal barrier coatings
Thin layers of thermal barrier coating (TBCs) are applied to metallic components of heat engines to reduce metal temperatures and to provide environmental protection. This results in increased engine efficiency and prolonged operational life. Of special current interest is the use of TBCs in aircraft engines. The TBCs, often yttria-stabilized zirconia (YSZ), are deposited on nickel or cobalt-ba...
متن کاملAN INVESTIGATION ON EFFECT OF BOND COAT REPLACEMENT ON HOT CORROSION PROPERTIES OF THERMAL BARRIER COATINGS
In the present study NiCrAlY bond coating layer was produced by electroplating against common atmospheric plasma spraying (APS). Both types of the bond coats were applied on IN738LC base metal then, the YSZ (ZrO2-8% Y2O3) thermal barrier top layer was coated by atmospheric plasma spray technique. Hot corrosion is one of the main destructive factors in thermal barrier coatings (TBCs) which come ...
متن کاملMicrostructural investigations of EBPVD thermal barrier coatings
This paper deals with the morphology, constitutive phases and fine microstructures of some EBPVD processed yttria partially stabilized zirconia thermal barrier coatings. This study has been performed by X-ray diffraction and scanning and transmission electron microscopy. It was shown that the coatings studied were constituted of a single metastable tetragonal t' phase, as expected if one refers...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1995
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.61.614