Thermal Stress for Ceramics Roll Used in Molten Metal to Make Stable High Quality Galvanized Steel Sheet
نویسندگان
چکیده
منابع مشابه
IN SITU REFRACTORIES USED IN THE CONTAINMENT OF MOLTEN IRON AND STEEL STRATEGIES FOR THEIR DEVELOPMENT
In situ refractories are defined as brick or unshaped products, which react internally or with furnace atmospheres and/or slag components so as to be enhanced in their performance. Examples of such products are discussed with emphasis on those that are currently employed and are being developed for the melting of iron and steel. Some strategies for the development of future in situ products are...
متن کاملCorrosion of Galvanized Steel in Soils
The results of measurements of the corrosion of galvanized steel and of bare steel and zinc as reference materials after exposure to different soil conditions for a maximum of 13 years are reported. The magnitude and progress of corrosion of galvanized steel as determined by weight loss and pitting is interpreted in terms of the environmental conditions to which the specimens were exposed. From...
متن کاملIn-flight thermal control of molten metal droplet streams
Precision droplet manufacturing (PDM) is a process that builds complex 3D parts one nano-liter molten metal droplet at a time from a CAD file without the need for tooling. One method to control the droplet temperature when it arrives at the target is to heat the droplets in-flight. This note describes such a heater that uses helium and nitrogen as the convective heat transfer medium. Heating ra...
متن کاملEffect of Spring-back in V-tool Bending of High-strength Steel Sheet Metal Plates
B. Grizelj, J. Cumin, Mechanical engineering Faculty in Slavonski Brod, Slavonski Brod, Croatia D. Grizelj, Siemens, Zagreb, Croatia. This paper deals with the eff ects of technological parameters used in the V-die bending process, on the obtained product properties and dimensions. By variation of the tool geometry, several cases of steel sheet bending process are observed through the FEM simul...
متن کاملThe Effect of Header Geometry on Temperature Distribution in Cold Rolling
The objectives in the cold rolling process include improved sheet surface quality, enhanced steel mechanical strength, and better solidification operations. Given the increasing demand for higher steel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2004
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.70.1755