Thermal Stability of a Ni-Cr-W-Mo Alloy - Long-Term Exposures

Stability of eutectic carbide in Fe-Cr-Mo-W-V-C alloy

The stability of the eutectic carbide in a self-designed Fe-Cr-Mo-W-V-C alloy during solidifi atio as a alyzed i this ork. The ar ide pre ipitatio rule of the steel was calculated by Thermo-Calc.The typical microstructures at 1240 °C and 1200 °C ere o ser ed y opti al i ros ope OM ,field e issio s a i g ele tro microscope (FESEM) and transmission electron microscope (TEM). The selected area dif...

CORROSION RESISTANCE OF Co-Cr-Mo ALLOY USED IN DENTISTRY ODPORNOŚĆ KOROZYJNA STOPU Co-Cr-Mo WYKORZYSTYWANEGO W STOMATOLOGII

The presented paper studies the effect of the casting technology on the corrosion resistance of Co-Cr-Mo alloy. The investigations were conducted on a commercial alloy with the brand name ARGELOY N.P SPECIAL (Co-Cr-Mo) produced by Argen as well as the same alloy melted and cast by the lost wax casting method performed by a dental technician. The corrosion behavior of the dental alloys in an art...

Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique.

The purpose of this study was to compare the castability of Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) and Co-Cr-Mo (Vera PDI) alloys invested with either conventional (phosphate- and silica-based) or mixed investing techniques. A 10 X 10 mm square-shaped nylon net containing 100 open squares served as a template for construction of wax patterns, which were invested with phosphate-based inves...

Influence of temperature on passive film properties on Ni–Cr–Mo Alloy

Comparison of Dental Prostheses Cast and Sintered by SLM from Co-Cr-Mo-W Alloy

The article presents the results of a comparative analysis of the metal substructure for dental prosthesis made from a Co-Cr-Mo-W alloy by two techniques, i.e. precision investment casting and selective laser melting (SLM). It was found that the roughness of the raw surface of the SLM sinter is higher than the roughness of the cast surface, which is compensated by the process of blast cleaning ...