Thermal Stability, Mechanical Properties and Solvent Resistance of PP/clay Nanocomposites Prepared by Melt Blending
نویسندگان
چکیده
منابع مشابه
Synthesis and Properties of Plasticized Sulfur-Montmorillonite Nanocomposites by Melt-Blending
Plasticized sulfur/montmorillonite nanocomposites were prepared by the melt-blending method and the dispersion of montmorillonite (MMT) and the mechanical properties of the nanocomposites were studied. Natural sodium montmorillonite (NaMMT) and organically modified montmorillonite (OMMT) were used as filler. Scanning electron microscope (SEM), X-Ray powder Diffraction (XRD...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولThermal, Mechanical, and Degradation Properties of Nanocomposites Prepared using Lignin-Cellulose Nanofibers and Poly(Lactic Acid)
A variety of nanocomposites were prepared using lignin-cellulose nanofibers (L-CNF) and poly(lactic acid) (PLA) via a solvent casting process. Acid hydrolysis and high-pressure homogenization processes were used to produce L-CNF from unbleached kraft pulps. Tensile tests were conducted on thin films, and the nanocomposites containing 3 wt. % L-CNF showed a 32.4% increase in tensile strength com...
متن کاملThermal Stability of P-Type BiSbTe Alloys Prepared by Melt Spinning and Rapid Sintering
P-type BiSbTe alloys have been widely implemented in waste heat recovery from low-grade heat sources below 600 K, which may involve assorted environments and conditions, such as long-term service, high-temperature exposure (generally 473-573 K) and mechanical forces. It is important to evaluate the service performance of these materials in order to prevent possible failures in advance and exten...
متن کاملSynthesis and thermal stability of nanocrystalline Mg-6Al-1Zn-1Si alloy prepared via mechanical alloying
Thermal stability and the kinetics of the grain growth of nano-crystalline Mg-6Al-1Zn-1Si alloy prepared via mechanical alloying (MA) were investigated. It started with elemental powders, using a variety of analytical techniques including differential scanning calorimetry (DSC), X-ray diffraction method (XRD), and scanning electron microscopy (SEM) coupled with energy dispersive spectrometry (E...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Sciences
سال: 2007
ISSN: 1812-5654
DOI: 10.3923/jas.2007.2480.2484