Thermal Simulation and Warping Deformation Experimental Study of PEEK in Material Extrusion
نویسندگان
چکیده
Front Cover: When using material extrusion (MEX) method to print parts made of Polyether-ether-ketone (PEEK), due the uneven distribution temperature field and stress field, prone warping deformation. Reveals influence rules each printing parameter coupling effect between them on warpage This lays a foundation for realization PEEK denture forming by MEX. is reported Jiang Han, Ju Tong, Xiaoqing Tian, Lian Xia, Dingyifei Ma in article 2000055.
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
a study on rate making and required reserves determination in reinsurance market: a simulation
reinsurance is widely recognized as an important instrument in the capital management of an insurance company as well as its risk management tool. this thesis is intended to determine premium rates for different types of reinsurance policies. also, given the fact that the reinsurance coverage of every company depends upon its reserves, so different types of reserves and the method of their calc...
a contrastive study of rhetorical functions of citation in iranian and international elt scopus journals
writing an academic article requires the researchers to provide support for their works by learning how to cite the works of others. various studies regarding the analysis of citation in m.a theses have been done, while little work has been done on comparison of citations among elt scopus journal articles, and so the dearth of research in this area demands for further investigation into citatio...
Transient thermal study of recuperative tube in tube heat exchanger operating in refrigeration system using experimental test and mathematical simulation
Joule-Thomson cooling systems are used in refrigeration and liquefaction processes. There are extensive studies on Joule-Thomson cryogenic systems, but most of them coverage steady state conditions or lack from experimental data. In the present work, transient thermal behavior of Joule-Thomson cooling system including counter current helically coiled tube in tube heat exchanger, expansion valve...
متن کاملexperimental evaluation of collpase deformation behavior of a rockfill material
to investigate the saturation induced collapse deformation behavior of rockfill material, a set of large-scale triaxial tests were conducted in saturated and dry-saturated conditions. specimens were tested under various confining pressures. for dry-saturated tests, specimens were sheared in various stress levels. results of all dry saturated tests indicate a sudden reduction in the specimen vol...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Macromolecular Theory and Simulations
سال: 2021
ISSN: ['1022-1344', '1521-3919']
DOI: https://doi.org/10.1002/mats.202170003