Thermal shock behaviour of angle-ply and woven dense ceramic-matrix composites
نویسندگان
چکیده
منابع مشابه
Comparison of Cyclic Hysteresis Behavior between Cross-Ply C/SiC and SiC/SiC Ceramic-Matrix Composites
In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMC...
متن کاملInvestigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics
Due to their sensitivity to impact-induced delamination, woven fabric reinforced polymer composites have limited practical applications. Hybridization of polymer composites has been proposed as a solution to this problem. In this study, the effects of fiber reinforcement type, hybridization method, plies stacking sequence and loading rate on mode I delamination behavior of pure basalt, pure nyl...
متن کاملModeling Cyclic Fatigue Hysteresis Loops of 2D Woven Ceramic Matrix Composites at Elevated Temperatures in Steam
In this paper, the cyclic fatigue hysteresis loops of 2D woven SiC/SiC ceramic matrix composites (CMCs) at elevated temperatures in steam have been investigated. The interface slip between fibers and the matrix existing in matrix cracking modes 3 and 5, in which matrix cracking and interface debonding occurred in longitudinal yarns, is considered as the major reason for hysteresis loops of 2D w...
متن کاملMechanical Properties of Angle Ply Laminated Composites- A Review
The purpose of this study is to review many of the available guidelines for Polymer composite materials. Guide lines for failure mode, laminates orientation, winding angle, water absorption, as they strongly influence the mechanical properties of composite materials. The present review is focused on composite laminates made of glass, carbon, graphite, hybrid and natural fiber composites, since ...
متن کاملThermal Conductivity and Expansion of Cross- Ply Composites with Matrix Cracks
Theoretical models are developed for heat conduction and thermal expansion in a fiber-reinforced ceramic cross-ply laminate containing an array of parallel transverse matrix cracks. Two stages of the transverse matrix cracks are considered : Stage-I with tunnel cracks in the 90” plies aligned parallel to the fibers, and Stage-II with cracks extended across both the 90 and 0” plies with intact f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Science
سال: 2008
ISSN: 0022-2461,1573-4803
DOI: 10.1007/s10853-007-2314-2