Thermal Resistance Measurement across a Wick Structure Using a Novel Thermosyphon Test Chamber
نویسندگان
چکیده
منابع مشابه
Thermal Resistance Measurement across a Wick Structure using a Novel Thermosyphon Test Chamber
A novel system is developed for measuring the thermal resistance across thin layers of sintered copper wicks of varying porosity. Wicks to be tested are integrated into a passive vertical thermosyphon system and the resistance is measured for a series of input power levels. The wicks are sintered to a thermally conducting pedestal above a pool of de-ionized water and heated from below. The appa...
متن کاملA Novel Thermo-hydraulic Test Platform for Micropillared Array Thermal Wick Optimization
Heat pipes have immense potential in the future of thermal management in electronic devices. As a passive device, they rely solely upon capillary forces to recirculate the coolant from the condenser to the evaporator via a wicking structure. In intermediate temperature heat pipes the limiting factor for heat removal is the capillary limit, which indicates the maximum recirculation rate that the...
متن کاملA Novel Thermal Response Test Using Heating Cables
The in situ thermal conductivity of the subsurface has been measured with a novel thermal response test using heating cables inserted in a vertical ground heat exchanger. An electric current is applied along the cables to heat the borehole prior to measuring water temperature recovery at various depths inside the ground heat exchanger piping. The one-dimensional line-source equation, combined w...
متن کاملA Novel Thermal Measurement for Heart Rate
Heart rate is an important indicator for the mental and physical state, but it is usually measured through physical contact. In this paper, a novel non-contact method of heart rate measurement has been proposed from the infrared sequence images. First, a square region of interest (ROI) was manually selected to cover the temple on the first frame. Then a head movement detection algorithm based o...
متن کاملA measurement on chemicals emitted from computers and printers using test chamber method
The printers emit the chemical compound when its temperature rises during normal operations. And it primarily influenced the chemical concentrations such as formaldehyde and VOCs (Volatile Organic Compounds) in a living space. The measurements on the various types of prints from different manufacturers such as laser jet type, inkjet type were performed in emission test chambers of 1m3 and 5m3 w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Experimental Heat Transfer
سال: 2008
ISSN: 0891-6152,1521-0480
DOI: 10.1080/08916150701815853