Thermal Residual Stresses and Spring back Effects on the Frequency Selective Surface Embedded Composite Laminates
نویسندگان
چکیده
منابع مشابه
non-linear behavior of polymer based composite laminates under cyclic thermal shock and its effects on residual stresses
the residual stresses in composite laminates depend on several factors including the conditions of fabricating process, property of materials, direction and lay-ups of the layers. however the thermo-elastic behavior of composite is one of the most important parameters affecting the magnitude of residual stresses. the elastic properties and residual stresses do not remain constant under cyclic t...
متن کاملResidual Stresses in Rotating Steel Cylinders with Composite Surface Layers
After undergoing a manufacturing process, materials may exhibit internal stresses referred to as residual stresses. In steel-composite hybrid structures, residual stresses are typically formed due to the unequal thermal behaviour of the steel and composite. Thus, knowledge of the residual stress state is important in the assessment of the external-internal loading in steel-composite hybrid stru...
متن کاملLayup Configuration Effect on Notch Residual Strength in Composite Laminates
The current trend shows an increasing demand for composites due to their high stiffness to weight ratio and the recent progress in manufacturing and cost reduction of composites. To combine high strength and stiffness in a cost-effective way, composites are often joined with steel or aluminum. However, joining of thermoset composite materials is challenging because circular holes are often used...
متن کاملOn the Calculation of Energy Release Rates for Cracked Laminates with Residual Stresses
Prior methods for calculating energy release rate in cracked laminates were extended to account for heterogeneous laminates and residual stresses. The method is to partition the crack tip stresses into local bending moments and normal forces. A general equation is then given for the total energy release rate in terms of the crack-tip moments and forces and the temperature difference experienced...
متن کاملNumerical Study on Residual Thermal Stresses in Carbon Fibre Pullout
This paper investigated the effect of residual thermal stresses on carbon fibre pullout by using cohesive zone modelling. The finite element method was applied to analyse the residual thermal stress components along the interface between the fibre and matrix due to curing. A comparison study on the anisotropic and isotropic material properties are considered using four typical carbon fibres, T3...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Computational Structural Engineering Institute of Korea
سال: 2013
ISSN: 1229-3059
DOI: 10.7734/coseik.2013.26.6.475