Thermal properties of paraffin based nano-phase change material as thermal energy storage
نویسندگان
چکیده
منابع مشابه
Microencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage
Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...
متن کاملThermal Analysis of Thermal Energy Storage Systemwith Phase Change Material
Due to fast depletion of conventional energy sources and ever increasing demand of energy, many researchers started paying attention to renewable energy sources.Thermal Energy Storage (TES) is one of the key technologies for energy conservation and has recently been developed to a point where it can have a significant impact on modern technologies. The present work deals with the study of a sph...
متن کاملExperimental Analysis of Latent Heat Thermal Energy Storage using Paraffin Wax as Phase Change Material
A significant amount of heat is wasted in manufacturing process, electricity generation, chemical and industrial process. Recovery and reuse of this energy through storage can be useful in conservation of energy. In the present study, a double pipe type heat exchanger has been designed and fabricated for low temperature industrial waste heat recovery using phase change material (PCM) paraffin w...
متن کاملEffect of Using Nano Encapsulated Phase Change Material on Thermal Performance of Micro Heat Sink
The aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (NEPCM) slurry as a cooling fluid instead of pure fluid. A threedimensional model of a circular channel using water slurry of NEPCM was developed. The results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...
متن کاملMicroencapsulation of Metal-based Phase Change Material for High-temperature Thermal Energy Storage
Latent heat storage using alloys as phase change materials (PCMs) is an attractive option for high-temperature thermal energy storage. Encapsulation of these PCMs is essential for their successful use. However, so far, technology for producing microencapsulated PCMs (MEPCMs) that can be used above 500°C has not been established. Therefore, in this study, we developed Al-Si alloy microsphere MEP...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Earth and Environmental Science
سال: 2018
ISSN: 1755-1307,1755-1315
DOI: 10.1088/1755-1315/105/1/012028